It is currently Wed Jun 23, 2021 8:46 am



Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Chopped the cage down on my GK13 (and some things to come)
PostPosted: Thu Jul 10, 2014 10:27 pm 
Offline
Buggy Addict

Joined: Thu Apr 21, 2011 1:44 pm
Posts: 2584
Location: Lubbock, TX
Started like 90% of the GK13's I've seen (I've only seen half a dozen of these all together...alex-buggy's being one of them, and only one other on this site).

Image

...then to...

Image

We spent some time like this due to needing some last minute shielding...it's simple flashing from Home depot and a bunch of zip ties. Tacky, but worked for what I needed.

This season, though, I've decided I'll put a little more cash into it. I bought a 4x8 sheet of aluminum plate and some DOM tubing.

After a little cutting, a little bending, and welding, I got this:

Image

Image

Cosmetically I think it looks a lot meaner. But I had some legitimate desires when setting this up. The original cage is made out of decent enough tubing...but the front end was so long it simply wasn't strong. It was flimsy. I don't think it would have helped a lot should I had come into need of a roll cage. On top of that, it's a welded cage now instead of a creaky bolted cage. Might be a little more complicated if I need to remove it, but it's stronger now than it ever was.

We're not done, yet, though. That roof only took a 3x3 piece of the plating. I'm going to be making some fenders, next...not sure how yet, though. I want to enclose the front wheels. 99% of my riding is putting around a field with the neighborhood kiddies and those front tires kick up a lot of pebbles, stickers, and dirt. I want something a little more protecting than fenders. Drawing board stuff. This is why the end of the tubing is still open for those who notice...I don't want to cap it and then have to grind it off in the next couple weeks to sort out how my fenders will work.

Lastly, the primary passengers (one of them is too occupied with getting her seat belt sorted out to grace you people with a smile). These two are the primary reason I haven't crammed my VFR800 engine into the back yet...it will become far less friendly to tiny passengers with the additional 90hp and a shifter lol.

Image

_________________
Roketa GK-34 EFI four seater...see what's up with her here!

Roketa GK13 Sold :(
Gen 5 VFR800 engine swap
Chopped roll cage


Top
 Profile  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Thu Jul 10, 2014 10:40 pm 
Offline
Buggy Addict

Joined: Thu Apr 21, 2011 1:44 pm
Posts: 2584
Location: Lubbock, TX
More pictures of the in-between...sorry I didn't take a whole lot.

http://imgur.com/a/FuoHw

_________________
Roketa GK-34 EFI four seater...see what's up with her here!

Roketa GK13 Sold :(
Gen 5 VFR800 engine swap
Chopped roll cage


Top
 Profile  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 6:43 am 
Offline
Buggy Enthusiast
User avatar

Joined: Fri Apr 16, 2010 1:56 pm
Posts: 480
Images: 2
Location: Athens, Greece
nice job makenzie!!!

_________________
3A MotorSports

Image

https://www.facebook.com/pages/3A-Motor ... 8253769727


Top
 Profile Personal album  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 12:27 pm 
Offline
Buggy Addict

Joined: Thu Apr 21, 2011 1:44 pm
Posts: 2584
Location: Lubbock, TX
Thanks Alex. I'm pretty happy with how it's turned out, even if it still only goes 35~40mph lol

_________________
Roketa GK-34 EFI four seater...see what's up with her here!

Roketa GK13 Sold :(
Gen 5 VFR800 engine swap
Chopped roll cage


Top
 Profile  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 1:13 pm 
Offline
Buggy Enthusiast
User avatar

Joined: Fri Apr 16, 2010 1:56 pm
Posts: 480
Images: 2
Location: Athens, Greece
35-40mph?? What mods have you done? My trail buggy even with lots of mods tops at ~32mph.

p.s: put that vfr in!!!!

_________________
3A MotorSports

Image

https://www.facebook.com/pages/3A-Motor ... 8253769727


Top
 Profile Personal album  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 1:23 pm 
Offline
Buggy Addict

Joined: Thu Apr 21, 2011 1:44 pm
Posts: 2584
Location: Lubbock, TX
Uni pod, 1" header pipe and 1.25" core muffler, 9mm wire...that's about it as far as performance goes. Also running 24's on both ends. I topped it out at 41mph but it took me a pretty good stretch to get up there...maybe 100yds or so.

I'm debating the VFR...I want to do it, but then again I mostly use the thing to tote my kids around at 5~10mph. It's a toss up between making my buggy faster or making my BMW faster haha

_________________
Roketa GK-34 EFI four seater...see what's up with her here!

Roketa GK13 Sold :(
Gen 5 VFR800 engine swap
Chopped roll cage


Top
 Profile  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 2:27 pm 
Offline
Buggy Enthusiast
User avatar

Joined: Fri Apr 16, 2010 1:56 pm
Posts: 480
Images: 2
Location: Athens, Greece
i thought you were using 22''.. 40mph is pretty good for a small 250. If you put the vfr you could still tote your kids at 10mph and yourself at 100 :lol:

_________________
3A MotorSports

Image

https://www.facebook.com/pages/3A-Motor ... 8253769727


Top
 Profile Personal album  
 
 Post subject: Re: Chopped the cage down on my GK13 (and some things to com
PostPosted: Sat Jul 12, 2014 7:10 pm 
Offline
Buggified
User avatar

Joined: Mon Jul 09, 2007 3:13 pm
Posts: 592
Images: 0
Location: CENTRAL MS.
Nice chop.
My Joyner SS would be nicer/cooler looking with a tad of a chopped roof.

*at least the rear down even with the front .... not tipped up like they are.

_________________
JOYNER 07' 650cc SS
Uni , Harley drag pipe exhaust , White Razor shocks , 14" rims w/Maxxis Zilla 28" front 30" rear , 11" deep dish steering with ball , lol.


Top
 Profile Personal album  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

blackLevel designed by GrafsS



phpBB SEO
© Buggynews.com - All Rights Reserved