| Author |
Message |
| < Video Links ~ Driving up a powerline cut through |
|
|
|
|
This is the powerline cut through behind my brother in laws house. The state just came through the week before and bush-hoged all the weed,small trees down so we got the idea to take the buggy & 4 wheeler up it to make some trails to race up and down, but the downed trees and the stumps left from the bush-hog slowed us down. This summer we are going to take a chainsaw and cut the stumps level with the ground so we can get up some more speed 
Jeff
| Description: |
|
Download |
| Filename: |
Powerline cut through 3.mov |
| Filesize: |
18.91 MB |
| Downloaded: |
341 Time(s) |
_________________
2005 Talon GX 150 UNI FILTER, 127.5JET,10gram rollers,1500clutch spring,39 tooth sprocket,Dazon bolt on muffler mount & high flow exhaust NGK IRIDIUM plug
My Videos
http://www.buggynews.com/topic7980.html
http://www.buggynews.com/topic8623.html
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
Looks like a nice place to ride...
You won't get in trouble for riding there?
We would here in Connecticut.
I'm jealous, there's not a lick of snow on the ground and you didn't have a coat on.
All the snow we got here is now covered with a layer of ice... Tough to ride.
Maybe you guys could put some jumps in there...
Cool video
_________________
Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
|
|
|
|
|
|
|
|
|
Well I'm just a late poster  This video was shot last summer tahts why I have no coat on yesterday we had about 3" of new snow but no buggy to ride  We went up to my brother in laws for the night then the snow came and we had to spend the night. I hope to get some better video this summer.
Jeff
_________________
2005 Talon GX 150 UNI FILTER, 127.5JET,10gram rollers,1500clutch spring,39 tooth sprocket,Dazon bolt on muffler mount & high flow exhaust NGK IRIDIUM plug
My Videos
http://www.buggynews.com/topic7980.html
http://www.buggynews.com/topic8623.html
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Going to Paddy's? You'll like the powerline trails there. Replace the grass in your video with dirt & loose rocks & you'll get an idea.
_________________
_________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
|
|
|
|
|
|
|
|
|
Good lookin ride. If you haven't yet.....you might want to tie down that airfilter. Looked like it was flopping around pretty good.
Those places are good ridin,I had one when I used to live in Oklahoma. Back when I only had a dirtbike.
Mike/W.E.TS.U.
_________________
I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
|
|
|
|
|
|
|
|
|
Where we ride, there are a few signs that read: DO NOT TRESPASS VIOLATORS WILL BE PROSECUTED!!
We should make a spot where all of th NC buggiers can come ride at. If only we had the time and money.
_________________
Talonkid's Carter GxIIr mods:
Rdneck intake, NCY intake, UNI, K&N on CVT, 132 jet, custom exhaust, and lots of STICKERS!!!
DRIVE IT LIKE YOU STOLE IT!!!
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Around here they don't care for you riding the cut throughs, but you do it a your oun risk. We are going to try and get it a little smoother so we can do timed runs up and down the hill.
Jeff
_________________
2005 Talon GX 150 UNI FILTER, 127.5JET,10gram rollers,1500clutch spring,39 tooth sprocket,Dazon bolt on muffler mount & high flow exhaust NGK IRIDIUM plug
My Videos
http://www.buggynews.com/topic7980.html
http://www.buggynews.com/topic8623.html
|
|
|
|
|
|
Articles
