| Author |
Message |
| < Maintenance and Repairs - Mini Buggy ~ Post about cable oiling (see below) |
|
|
|
|
the oiling idea worked great no problems. It took about 2 or 3 hours for the oil to pool on the other end. should work fine. Still need to play around with my chain though.
_________________
yerf-dog 3209
N.E. "GANG"
20x7x8 larger fronts and backs,new shocks,fenders,uni,reverse,10g rollers,1500 spring,39T spocket,gutted mufler,reinforced A-arms,new ball joints, BODY KIT, mikuni carb, single seater, custom fuel cell
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
I will have to give that a try. At one time it would take about 15 seconds for the forward on my Kinroad xt250gk to engage after shifting to forward. It could also be a weak spring on the gearbox, but I will give the zip loc baggie a try first. Thanks guys!!!
|
|
|
|
|
|
|
|
|
I just used the BIKE MASTER CABLE LUBE TOOL purchased from the Blade store and the lube,it worked great,didnt understand the directions at first but once I got it hooked up right it worked great.At first I was skeptical because when I sprayed the lube in the hole it was coming out the top of the tool and I thought this fecal matter aint gonna work,its not going to go the whole way thru the cable,but I sprayed it again for another 5 seconds and then I heard it bubbling out the other end,can def tell a diff in the cable now
_________________
roketa gk-19 250 cc,15 gram sliders and clutch spring from glade,36 tooth sprocket from tractor supply,unifilter with redneck intake,drpulley hit clutch from tnegg,50 watt amp and speakers from blade powersports
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I am glad you got it to work for you. I have found that this really is the ONLY way to really keep the cables lubed right and not have to hassle with the mess. I love Ric's idea, but it is such a proccess that I never did it.
Stu
_________________
"The Future In Off-Road"
"PLAY TOUGH-GET DIRTY"
WWW.BLADEPOWERSPORTS.COM
WWW.BLADEPERFORMANCE.COM
1-888-44-BLADE
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Articles
