Where did you order the filters, and the apc breather element?
I'll jump in here and answer that for you. You can get the K&N stuff directly @ http://www.knfilters.com/
Or you can have your local Pep boys, Autozone, Kragen, etc., order the K&N for you. The local parts stores will also carry the breather filters. They are usually hanging among the chrome and hot rod goodies.
I am unable to upload a pic of my intake setup on this thread ??? I bought my cold air intake at Pepboys all the parts are on the shelf I will get the part numbers at the local pepboys I was going to that before but never did. If you like the way it looks than ask for the part numbers and I will get them right away. here is a link to my personal album.
I am in the process of breaking the buggy in. I saw the advice concerning "strapping the rear springs". Can anyone give me a little more info on what this means, and what needs to be done.
I am in the process of breaking the buggy in. I saw the advice concerning "strapping the rear springs". Can anyone give me a little more info on what this means, and what needs to be done.
Thanks
fuzzymoto
check Randy's thread under modifications:
http://www.buggynews.com/viewtopic.php?t=4900
All the info you will need is there...and then some
Areblder, Did you ever find the part # for the intake? I like the way it looks and would like to get it. Did it improve your performance?
Thanks _________________ Chris Palmer
I did get those part #s posted somewhere on here I will get them up again or link to the post. Yes there is definitely a difference in the performance over stock. _________________ Randy
GTR250,GK32,Joyner 650SS, custom buggy http://www.youtube.com/watch?v=YiA8jfczFV8