| Author |
Message |
| < Aftermarket and OEM Parts - Mini Buggy ~ ***Steve's pics added*** Got My Eastside Performance Package |
|
|
|
|
Got it Friday. As you can see by the Pics, the pipe goes above the frame,
unlike the old one that went under. I had to remove the battery and
shock to instal it. NICE construction all smooth aluminum. On the end are some hex screws I'm guessing to take it apart if you need to.
The Uni Filter/tube mounted up nice. It's all aluminum too. They sent a #135 jet. I have not taken it out to the Wilds yet to test, just on the street.
It is a GREAT Improvement over stock. Plus I started using 91 octane gas.
That helped too. I wonder if it has a spark arestor in it, sure sounds good,
more like a big ATV. 
New Pipe 1.JPG: 756 Time(s) Viewed, 116.29 KB
|
|
New Pipe 2.JPG: 758 Time(s) Viewed, 109.42 KB
|
|
UNI Filter Intake.JPG: 761 Time(s) Viewed, 137.71 KB
|
|
_________________
Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
Will it fit a 150cc 2005 Blade.James
|
|
|
|
|
|
|
|
|
They list it as a part for the 2005 Twister Hammerhead but it will fit the
2004 150cc also. It fits my 2004 Vision like a glove. Mine is the same as
a KPX Kart. I would say that if your Blade looks like mine in the Pics, then
it should fit...........
Mark
_________________
Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Sounds great, did they explain the reason for all the new curves? I was assuming it was because of oil filter/cooler.
Also, my intake was bare steel that quickly rusted so that's a nice upgrade.
kell
_________________
Buggy-less at the moment.
Dazon Raider Mini 90 (busted transmission  )
|
|
|
|
|
|
|
|
|
No reason I can see except to get it up higher off the ground. It just fits
over the taller battery I have and is real close to the CVT intake tube.
_________________
Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
|
|
|
|
|
|
|
|
|
Mine took a little longer to get here. For some reason they sent me a 130 jet and I am nearly at sea level. Don't understand that one!! I have other jets to play with anyhow.
Here come LOTS of pics guys.
eastside04hammerheadexhaust3.JPG: 712 Time(s) Viewed, 121.09 KB
|
|
eastside04hammerheadexhaust5.JPG: 711 Time(s) Viewed, 72.5 KB
|
|
eastside04hammerheadexhaust7.JPG: 707 Time(s) Viewed, 93.11 KB
|
|
eastside04hammerheadexhaust2.JPG: 707 Time(s) Viewed, 57.73 KB
|
|
eastside04hammerheadexhaust9.JPG: 707 Time(s) Viewed, 73.12 KB
|
|
eastside04hammerheadexhaust4.JPG: 709 Time(s) Viewed, 88.13 KB
|
|
_________________
2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
This is one serious piece of equipment. It makes a Toy Jukies pipe look like... well, a toy! There is a massive difference in workmanship, quality, and engineering between this and the TJ offering. I can't even begin to explain it. The velocity stack is the exact same unit as supplied by Toy Junkies with their pipe.
-Steve
_________________
2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni
|
|
|
|
|
|
|
|
|
| Kelly wrote: |
Sounds great, did they explain the reason for all the new curves? I was assuming it was because of oil filter/cooler.
Also, my intake was bare steel that quickly rusted so that's a nice upgrade.
kell |
Kell What size is the inlet on your uni filter.I think I might have to fix you up with a kammak filter out of aluminum.It would be a good chance to get some comparison feedback also.If it performs as good for at least half the price made from aluminum, people would be happy.
Ken
_________________
homemade larger dia. exhaust
aluminum intake unifilter
26inch rears 22inch fronts
itp aluminum rims
milled head, port and polish
5/16 shim in secondary 11gr. sliders
Go ahead try it,don't let fear or stupidity stand in your way
|
|
|
|
|
|
|
|
|
I think you will be impressed Steve
Mark
_________________
Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Awesome! I am anxious to see your comparisons of the performance of the pipes. (especially the redneck variety!)
Looks great! Did they charge you the original price or the exytra 30 bucks or whatever?
|
|
|
|
|
|
Articles
