Can Some one give me some directions of how to make a shim? I also need to know what to make it out of ? i just got a new belt from stu and am ready to make a shim right now. thanks
Thanks Jabo for you help. I am having some trouble getting the nut on the clutch off so i can get the spring out. Can anyone give me some pointers of how to get that thing off there.
For about 15.00 you can get it from Sears. _________________ Boxer 150, Pipe/Cam/UNI-Air, Hot CDI, Jet 127.5, more lights, High output ignition coil. Soon to have Roso racing cluch and variator with 9gm. Need face buster spring!
When you get one, it can be a regular socket. 1-1/2"
This is what I do, put the clutch on the floor, sit down, put one foot on each sideof it, take the nut off with impact wrench, then slowley lift op on your feet. This way you won't have the spring come flying at you. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
I can tell you that the socket is also available at Auto Zone for those that are curious. That's where I got mine when I was in a rush. About 2 miles from my house.
Just bring your clutch with you and match it up to be sure if you have doubts on the size. Sockets of that size are hanging loose so you can try them on the large nut.
-Steve _________________ 2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni
I just took my clutch apart today and I put the clutch assembly in a vice and used a pipe wrench to remove the nut. It worked great. _________________ Twister modded 150
2 - Blade 70KT's
Everyone has a differant way of doing things. Isn't this site great! Someone can read a few ways of doing things, and pick which is best for them. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Articles
