What aftermarket parts fit

Posts: 3

I just got a 05 crossfire 150 with a howit motor how can I tell what aftermarket parts are for it

Posts: 4286

there are alot of parts for it. you can chaange the rollers, clutch, main spring, variator, clutch springs, rejet the carb, put a uni air filter on, exhaust.

so there is a good bit for it.

Posts: 896

The Howit engine is a typical gy6, almost any aftermarket gy6 parts fit it. There are big bore kits available also.

Posts: 2640

is it the grey or yellow crossfire???

The grey one has reverse...

If you have the yellow one, you can buy all new front knucles with brakes from the crossfire 150R, as well as the master cylinder and such...

Like everyone else said, all 150 performance parts will fit... The benefit for the Howhit engine though, is that it already has the large valve head from the factory... With that, all you need for top end alterations if you want to go wild, is a cam, some port work, and a good carb set-up...

If you just want cheap upgrades that are easy on the wallet and give you a decent performance gain, then go for the CVT mods first... Change the rollers, the clutch spring, and gut your exhaust with a hole saw... Rejet the carb with a 128 jet if you gut the exhaust really good, or if you just run the drill in, get a 122... Those are the most common... Get a piece of sink drain pipe and a UNI filter and you are set with a nice running, heck of a lot better performing machine!!!

The man you gotta see about that crossfire is Krusekontrol... He has 5!!!

Good luck!!!

John Very Happy

Posts: 2640

also, can you update your user profile and let us know where you are from? It would help us out in finding a dealer closer to you, and getting you parts or service faster!!!

John Very Happy

Posts: 3

Gy6 thats what i was looking for im going to update my profile now i forgot about that been reading alot on here great info thanks for all the help i got a few things planned for it when i get homeclutch 1st thou need some wheel pulling power