??? for towing?????

Posts: 80

i was struggling with putting on a hitch with my joyner 250 i put a U-ring and attached it to the back to put the tow strap hook on it fits perfect do its sort of a redneck hitch but do u think it will work its just a basic U-ring from home depot

Posts: 80

sry bout that i typed it wrong not a U-ring i meant a U-bolt

Posts: 1737

um i dont under stand if you are goign to do serious towing then you are going to need the weld a hitch and bracket

and when you tow make sure you tow in low all the time

Posts: 80

no i mean like towing a quad or buggy out of a ditch just simple things

Posts: 1737

ok but why not just put a tow strap around one of the rear bars ? that would be way easier

Posts: 325

unless u r going to tow a trailer that needs a ball don't worry about it ,strap it to the frame.

Posts: 80

when i tow the strap to the frame it slides and doesnt work i think the U bolt will work if its just 4 pulling quads out of ditches every once in a while right?

Posts: 13

if u know how to weld cut a large chain link in half and weld it to the chassis or maybe tie a piece of line to each side of your buggy so it forms a "v" then run a strap thru that, "a towing bridle" just some thoughts from a tugboat guy!
JT

Posts: 1163

or you could try this. It cost me less than 5 bucks at the hardware store.