After a full day of riding yesterday, my buggy started pulling sharply to the right when I let up on the gas. A visual check yielded no clues. Has anyone experienced this before? If so, any pointers? _________________
2005 Peirspeed Cobra 252
Modified intake and exhaust
Likes to be driven hard!
what buggy do you have does it have a rear break on each side and an open diff _________________ 06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
Good point geek, I wish everyone would tell us what they have b 4 we try to help them. It would really save time and effort on both sides.We really want to help!!!
Had a rear axle bearing fail on one side. The axle would move back and forth causing the buggy to turn on decelleration. It was a solid axle buggy and all the ball bearings had come out of the bearing cage giving the axle almost a full inch of travel. We did not even realize the bearing had come apart until the chain started slipping.
RH _________________ Carter Talon GX150IIR, KOSO Clutch, 9 gr rollers, KOSO variator, 1500 RPM spring, CVT snorkel, K&N filtered crankcase+trans vents, Red neck intake w/ uni filter, modified DLX muffler, 132 jet, drilled and shimmed slide, hot coil, hp CDI unit, skid plate.
Good point geek, I wish everyone would tell us what they have b 4 we try to help them. It would really save time and effort on both sides.We really want to help!!!
Thanks to those who responded. At least I've got somewhere to start looking. I'll follow up when I find the problem.
Mine is a Peirspeed 250. Good point in that I should have mentioned that. I'll add it to my signature as I've seen that others have.
The Peirspeed has 4 wheel independent suspension with dual chains (1 on each side), and 4 wheel disc brakes. _________________
2005 Peirspeed Cobra 252
Modified intake and exhaust
Likes to be driven hard!
ok i am very familar with your buggy has i have a roketa one you have 4 independent breaks check you right one both front and rear _________________ 06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
When you replace the bearings get a quality replacement. The factory Chinese bearings are simply garbage. I bet over half of the buggy owners have bad bearings that need replacing without even knowing it.. _________________ Darren,
Buggy Junkies
Too much power is almost enough!