Yard Cart Hitch

Posts: 93

i found this little bracket that is a PERFECT hitch to pull my lawn tractor's cart.

is i a bad idea to drill 2 holes through the frame to but bolts in.
i wasnt sure if this whould weaken it to much. if this is a bad idea, any better ones?

Posts: 2583

Most of the brackets just attach to the frame, not through it. I wouldn't be drilling any holes in that section of the frame as it takes a lot of stress back there....

Posts: 1893

I just attach the picture below to my chain tensioner.

Posts: 2583

That makes sense...

Posts: 93

na, the chain tensioner is to high. the brack i have wasnt made to be a buggy hitch, its just some random bracket i found in a toolbox. i could weld it but id rather it not be permanent. im going to see what i can do with some U brackets.

Posts: 19 · Newbie Joined: 16 Aug 2008 Posts: 19 Pictures: 0

Go with U-Bolts and some sort of rubber bushing. If you can achieve this, you can tighten (secure) the hell outt the bracket and be totally fine.

Posts: 17

my maxxam which is virtually identical to your talon came with the small hitch tube welded on.

Posts: 238

Had to throw this in.... just found it surfing Costco Canada, it's expensive, but looks fun.

Posts: 1737

you should not have found that cause you are campaign for a new buggy right to fit your whole family or more of your family and now if your wife sees that your done for

Posts: 407