JOYNER OWNERS

Posts: 10 · Newbie Joined: 23 Aug 2008 Posts: 10 Pictures: 0

I have 2 joyner buggies, 1100 and 800 vipers, I am starting a database of broken output shafts, if you or someone you know has broken one or more please contact me via email;
Mbergs_1@charter.net

If I get replies and have interest I will proceed with making a better part.

Shine

Posts: 341

There already being made in Hunnington Beach Ca.
Tool steel imput shafts.
W.C.

Posts: 154

Are we talking about the output shaft that connects to the two inboard CV joints?

Posts: 341

I did read the post wrong , It does say output shaft.
I know there is alot of input failures and that is what we made an aftermarket piece out of good material.
Output's I dont know about. Confused

W.C.

Posts: 10 · Newbie Joined: 23 Aug 2008 Posts: 10 Pictures: 0

who is making the input shafts...they can more than likely help with the output (diff) shafts, I have a person working on it now
a colaberation may be in the best interest of all.....

Posts: 341

L.G.R. Hunnington Beach Ca.
I sell the hardened shafts.
I will keep an eye on your post and see what the responce is
too determine if it is a needed part.

W.C.

Posts: 28

I have a 650 SS and I broke the axle shaft near the wheel. If aftermarket shaft assemblies are available I would be interested in a set. RICK

Posts: 10 · Newbie Joined: 23 Aug 2008 Posts: 10 Pictures: 0

a picture is worth a few words.....

Posts: 28

Wow twisted both sides off. You can see how the rotated, thats crazy. Haven't done that ...YET! Its probably coming though.

Posts: 1737

wow did the turbo one do that it must have lol