Newbie looking for Kinroad 250 advice

Posts: 18

currently rear:22x10x10 front:20x7x8
would like to use a set off a rhino 25x10x12 / 25x8x12
i know the hubs are different and was hoping i could install some yamaha hubs and spacers.
ever heard of anybody doing this?

Posts: 1093

I believe Kell put Yamaha hubs on the rear of his Twister Hammerhead and they fit right on with no mods. Don't know if the kinroad would be the same though.

Jamie

Posts: 4335

there are some 4x110 rear hubs that will fit. I will have to check.

I will be out for about a week, having another knee surgery. but I will get some people working on which ones will fit. I know the kinroad basic has 4x110 all the way around

Posts: 1748

off topic but good luck bige in you surg recover fast we all need you Very Happy

Posts: 18

appreciate the info. i know my front hubs have a much smaller bolt circle than the rears but dont know what the sizes are.
If you go to AB and look at their Terranex 250 it is exactly like mine but would like it to sit like the Phoenix 300.

BIGE hope all goes well with your knee-op

Posts: 4335

front bolt pattern is 4x110 rear is 4x137.

Posts: 18

thanks, headin out today for weekend of riding hopefully.
just got buggy back from shop (rad fan shorted out on first ride) if everything holds together this time I will be looking to start mods. want to get as much lowend as possible because where we ride the trails dont allow hi-speed. will let ya know how things go Razz