800cc sad viper minin got no fule pursure

Posts: 26 · Padawan Joined: 11 May 2008 Posts: 26 Pictures: 0

got a 800 sand viper mini its got no fule persure all i know is it was runing good we just stop and got some food went 2 start it nothing the i dont know if its the fuel pump or what

Posts: 203

either the pump or the pressure regulator, or maybe a fuel leak

Posts: 1628

Start by checking power to the pump. If there is no power, you have a bad ignition switch, bad fuse, damaged wiring or bad pump. Next disconnect the fuel line from the pump and quickly apply ignition power and shut it off. If there is no fuel, you have a bad pump or blocked intake line from the tank. These steps should get you started - Let us know what you find.

Posts: 26 · Padawan Joined: 11 May 2008 Posts: 26 Pictures: 0

ok hear what i got i check my fues ther good . i have power ever where execp 2 the pump . the relay r good when u turn the switch on all the dash light r on .the only thing the fan did kick on 4 a seced and then went off . now when u turn the switch on ever thine works execp the fan and the fule pump.so what i did is 2 c if its a short somewhere . i ran a wire from the batter 2 the fule pump and stared right up so what do u think its a ground wire i have no ide .or the switch .if i cant find the problem i am thinking about a togo switch but i dont know if that will heart enything eles . i do know that the fan and the pump run in together .

Posts: 1628

You're on the right path. Trace the fuel pump power back to its source to find the faulty wire or control.