| Author |
Message |
| < Modifications - Mini Off Road Kart ~ A few more mods |
|
|
|
|
where do you put the head light fluid in the oil and how does it make them brighter ?
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
polaris ranger
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
It enhances the bulbs brightness, by reflecting light in all directions. You have to make a custom reservior for the fluid, with plumbing to and from the headlights. I used an oil cooler setup to keep mine from boiling! 
_________________
Lance Charger 250s
K&N filter, Custom MRP exhaust, Blaster front and rear shocks, Adjustable CDI, Performance coil, 130 Main jet, Yellow clutch arm springs, Blue Main spring, MRP Slotted Variator, 21 gram sliders
|
|
|
|
|
|
|
|
|
I didn't think of that. I used a series of peltier heat exchangers to control temperature. The faster the buggy runs the better the exchangers work...
_________________
08 Joyner SandViper 250
07 Joyner SandSpider 650
06 Tank Urban Touring 150SE
04 Yerf-Dog Spiderbox 4209 GX150 (SOLD)
04 Yerf-Dog Spiderbox 3206 GX150
81 Honda Passport C70B
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
nice, now if i could just find some blinker fluid, and some freqeuncy grease, my electrical problems would be solved.
_________________
Lance Charger 250s
K&N filter, Custom MRP exhaust, Blaster front and rear shocks, Adjustable CDI, Performance coil, 130 Main jet, Yellow clutch arm springs, Blue Main spring, MRP Slotted Variator, 21 gram sliders
|
|
|
|
|
|
|
|
|
If you lived closer, I'd let you borrow my wire stretchers. It's a must have tool in your box. On second thought, I probably would never get them back...
_________________
08 Joyner SandViper 250
07 Joyner SandSpider 650
06 Tank Urban Touring 150SE
04 Yerf-Dog Spiderbox 4209 GX150 (SOLD)
04 Yerf-Dog Spiderbox 3206 GX150
81 Honda Passport C70B
|
|
|
|
|
|
|
|
|
y would you want head light fluid isnt it just something else to break or go wrong i just dont under stand
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
polaris ranger
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| ageekwithabuggy wrote: |
| y would you want head light fluid isnt it just something else to break or go wrong i just dont under stand |
thats true , it is one more thing to keep up with... like we don't have enought to keep up with already. Here it is, the middle of summer and I haven't changed the winter air out in the tires yet
_________________
3206 yerf. too many mods to list. easier to list what has not been modified- seats and steering wheel. plus one set of kidinme's hand made special collectors edition fuzzy dice. We support pole dancing.
|
|
|
|
|
|
|
|
|
| ckau wrote: |
| thats true , it is one more thing to keep up with... like we don't have enought to keep up with already. Here it is, the middle of summer and I haven't changed the winter air out in the tires yet |
Air? I've been running helium in the tires to make my buggy lighter. Now I plan to replace it with pure hydrogen by setting up my own electrolisis jar so I can add and remove pressure on the fly. When I air down the tires, it will dump hydrogen into the carb intake...
_________________
08 Joyner SandViper 250
07 Joyner SandSpider 650
06 Tank Urban Touring 150SE
04 Yerf-Dog Spiderbox 4209 GX150 (SOLD)
04 Yerf-Dog Spiderbox 3206 GX150
81 Honda Passport C70B
|
|
|
|
|
|
|
|
|
| ckau wrote: |
| ageekwithabuggy wrote: |
| y would you want head light fluid isnt it just something else to break or go wrong i just dont under stand |
thats true , it is one more thing to keep up with... like we don't have enought to keep up with already. Here it is, the middle of summer and I haven't changed the winter air out in the tires yet |
SON OF A GUN, thanks for bringing that up ckau i knew had forgotten to do something.thats why i haven't had the power i had before, forgot to change out that heavy winter air 
pghruby what is the safe amount of helium pound wize to run in the tire.i want to be light like a feather but stay on the trail though 
pud
_________________
2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| pud wrote: |
pghruby what is the safe amount of helium pound wize to run in the tire.i want to be light like a feather but stay on the trail though
pud |
There's an equilibrium number that allows to to float across terrain instead of using the tires for cushion. If you go higher than this number, you get no traction. If you go less, the ride is too hard. The best way is to get to this number is put a bathroom scale under each corner and try to adjust the weight between 2-10 lbs. with you in the buggy.
You really need to go the hydrogen route. I figured out that at 5000 RPM you can generate enough hydrogen with the electrolysis jar to attach a welding hose. I just need to but a center stand on the buggy and a throttle lock. Pop the buggy up on the stand, run the engine up to 5K, set the cable lock and crack open the valve. The hydrogen will melt any mixture or thickness of metals on your buggy, but it takes a while to get used to not seeing a flame.
_________________
08 Joyner SandViper 250
07 Joyner SandSpider 650
06 Tank Urban Touring 150SE
04 Yerf-Dog Spiderbox 4209 GX150 (SOLD)
04 Yerf-Dog Spiderbox 3206 GX150
81 Honda Passport C70B
|
|
|
|
|
|
Articles
