which frame

Posts: 4335

now that I have the 300cc atv stripped down, its time to chose a frame. I have been looking at 150 frames, and these.

what are your thoughts on these? or should I go with a 150 frame?

Posts: 242

BIGE,
Just my 2 cents.....

If you use a 150 frame then you already know where everything runs, mounts, and what size everything you will need. Less fabricating, but less customizable.

However if you went with a frame like the ones above, you can customize it alot more (suspension, rims, tires, mounts and accessories). A bit more fab-ing but you can make it your own.

If I had the choice I would choose the frame above!

Good luck with it either way. Make sure to keep us posted on this new project. I cant wait to see what you do!!! =)

Posts: 1748

i would say for that kind of power i would want a independent all the way around

Posts: 242

Something else to just bring to your attention before you decide:

In the frame in the first pic...look close at the front swing arm set up...seems like that would be a really weak point. May have to consider different placement or mounts. Also he has handle bars?!?! Im sure you can change to sterring wheel real easy, but things to keep in mind while looking at these frames.

Cody

Posts: 4335

since I have the front suspention I was palnning on useing it. I kinda like the secound frame.

Posts: 6294

I ended up buying plans for 3 different karts. I didn't follow any of them. I used them as a guide and made the bends to what I liked. It takes longer to make it up as you go but in the end it is your idea that you are driving around in. Good luck.

Posts: 4335

There are quite a few plans out there. this will be a winter project. if I can get alot of ideas from people I might be ready to start around oct

Posts: 1832

Have you checked out the "Sidewinder" style chassis? They look like a great design, especially if your 300 is an air-cooled motor.

Posts: 4335

is there a sight for the sidewinder?

Posts: 1832

I have seen them in action on YouTube. They videos seem come from Austrailia, but getting plans for one here should be easy enough if you like them.
Also try to Google for the Sidewinder Mini Buggy Chassis and see what you come up with. I tried to hit you back earlier but the server for BuggyNews was in low gear and I got so frustrated I gave up for a while.