Funnyman - great to see your 'Officially' on board now with the post and all Hey, don't think I've forgotten bout your help on Saturday.....Cash in the mail by end of the week!! _________________ 2006 Twister 150
UNI/redneck intake
122 jet / 10 gram sliders
1500 rpm spring-Yellow-
Prodigy Clutch
Prodigy Teflon coated Variator
Trail-Tech Speedo
Performance Coil / CDI / Iridium Plug
LEAD FOOT !!!!!!
Funnyman - great to see your 'Officially' on board now with the post and all Hey, don't think I've forgotten bout your help on Saturday.....Cash in the mail by end of the week!!
Probably won't be able to stop him now!!!!!!!!!!!! !
Funnyman,you made the ride worth while even with the break downs! It was a pleasure to meet you,and Brent!
If I had just taken an hr,I could have had it running again! Believe it or not .....all that was wrong was the nut that holds the starter-clutch in place, CAME LOOSE!!!!! The down side was when I got home and took it apart.... I killed my stator !!!!!!!! If I would have just taken a few minutes to do more investigating,I'm sure TH,or someone would have had the right puller for the flywheel!!!!!!!
Any-who a small ride may be in the works for early/late fall. Incase anyone might be interested.
Mike _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
WETSU - you are one of the unfortunate Americians here in the United States of America that..............Has my LUCK I say that but was very 'lucky' at St. Joe's on the trail rides we took. I might also be up for a ride again in late fall...and I'll surely be up for some of those ribs _________________ 2006 Twister 150
UNI/redneck intake
122 jet / 10 gram sliders
1500 rpm spring-Yellow-
Prodigy Clutch
Prodigy Teflon coated Variator
Trail-Tech Speedo
Performance Coil / CDI / Iridium Plug
LEAD FOOT !!!!!!
WETSU - you are one of the unfortunate Americians here in the United States of America that..............Has my LUCK I say that but was very 'lucky' at St. Joe's on the trail rides we took. I might also be up for a ride again in late fall...and I'll surely be up for some of those ribs
Well ok,but only if you tell me how your buggy rode after you changed your swing arm mount.... You did lower it right????????? oooooorr did Funnyman tell a Funny ?
Before I drop the buggy back on the floor,I am considering the same thing.
Oh I know it....it gives me a reason to drink! _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
Yep I did lower it to the bottom hole and I like the results. Some say it raises your CG and will make roll-over more likely. It actually gave me a little more ground clearance and at St. Joes on the woods trail. I rode the 100 trail 2 times - once with swingarm in upper hole and once with it in lower hole. I could tell a difference with the ride...more cushion/lot less dragging on the rocks I guess...Did not feel like it was going to roll-over any more than before--actually felt like I had better control! Don't know it was really happening or I just wanted it be that way The only concern I have is the way the bracket is shaped on my hh150 when I lowered swingarm to bottom hole--when the swingarm maxs out when compressed down the bracket seemed to lightly hit the swingarm only on one side? I have not investagated this since I've been home, but it was such a case that it worried me, just maybe a little grinding mod! All in all I will not move it back to top hole .....I like the diffenence it made _________________ 2006 Twister 150
UNI/redneck intake
122 jet / 10 gram sliders
1500 rpm spring-Yellow-
Prodigy Clutch
Prodigy Teflon coated Variator
Trail-Tech Speedo
Performance Coil / CDI / Iridium Plug
LEAD FOOT !!!!!!
I said above that 'it worried me' and I actually meant 'it did NOT worry me'
I will try it..... CG doesn't really bother me to much(I deal with that everyday),I am however looking for a smoother ride, since where I ride sometimes is ALOT of rocks!
Ribs are on me,I think a few of us are going back to St.Joe in the fall. No exact dates yet....., but any,and all are welcome to attend. I'll remember my camera,Promise!
Mike _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
Almost forgot....Chris tell your brother for me,thanks again for the tow! It was good to see you again,I wish it could have been longer....but what can I say?
Check your calander for a ride in the fall.
Mike _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
Thanks Chris, it was a pleasure to see you again, wish
your brothers were there so I could of seen them again,
oh well, maybe next year. Get those motor mts fixed..!!! _________________ 05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot