I don't see a reason for the links not working--other than they are very long due to the long folder and file names. In my Edit mode I can preview your post and the pix all work but not once saved & viewed normally. Right click on each photo and copy the image location. Paste it into notepad and you'll see something is putting an extra space between the "o" and "g" in each team hog file name.
They worked for me in preview mode as well. The odd thing is the edit button wasn't available to me like it normally was or is.
Strange... _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
I want to think those that help me and my son (ACBlind).
Blister, RayInKY (Ray and Eric), JohnnyFazor, GoGoKarting and Jay, Funnyman... and any others I've forgotten...
To a person, everybody associated with BuggyNews is, was and are very good people. We all have our own little quirks and our own little speciallties.
Together we make one heck of a team....
Finally, here's some more pictures of my Yerf-Dog. Broke, Fixed, and Repaired...
This is one flat that I wasn't expecting:
It was a smooth fall, my feet were covered with the sand and dirt. It was a really smooth failure.
The front end turned over to my left and the buggy just went down..
No, this isn't how I ended up... I just thought it would give some scale to the whole picture...
If I quote the posts and preview it, they show up as well..
So, I'm gonna to try quote my own post in the hopes that it will work. _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
Okay... Now I'm stumped... I give up... They work fine on another forum so I really don't want to move them. I may try it under another thread after I've copied the picutres to a new location such that I can post them again...
Sorry guys... _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
Let me look in the buggy bash 2008 forum itself, maybe something is a miss. I'll let you know. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Nothing yet. It all looks good behind the scenes. I'll look more when I get the kids off to school. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
I occasionally run into Photobucket link problems but have never been able to figure out the cause. I've found if I stick to the "old school" conventions of short file names, no spaces, no caps then I never have any trouble.
Chris you might want to just upload them here. Doesn't fix the bb code problem but it'll work. _________________ _________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
Chris don't worry about it....I'll post some when we get back next month. (I will remember my camera this time). Good luck with the fix,I'm rootin for ya!
Mike _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
I occasionally run into Photobucket link problems but have never been able to figure out the cause. I've found if I stick to the "old school" conventions of short file names, no spaces, no caps then I never have any trouble.
Chris you might want to just upload them here. Doesn't fix the bb code problem but it'll work.
It takes so long to get them up here... and I have to resize all of them to do so..
I should have known better. I too usually live by "simple is best" _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
Chris, I don't resize mine, I just take them from picture file, and put them up here, no problem. _________________ 05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot
Articles
