| Author |
Message |
| < Meet and Greet ~ Thought I was out $1500 |
|
|
|
|
I bought my Terminator 150 3 years ago as a cheap alternative for the kid instead of a four wheeler, after buying it found that i could not find parts any where for it and thought i would just be out. The first thing to go was the speedo no big deal then the muffler broke so my buddy made me a new one out of pipe washers and stuffed it with steel wool man the power that gave it but once again then the tires after a year went bad so i went to the farm store and got some over sized tires i was throwing dirt every where but the exstra weight of them got the clutch so i parked it and havent rode in almost two years i keep the engin going every couple of months .
So here I am today us army Deployed to Iraq and decided to do some reserch to see if i can fix it and man i was so suprised to find out how much these thing have taken off
Have ordered the new clutch and a throtel cable already and looking at all the mods there are cant wait to get back and get it going again..
thank you so much for all the good reading here, feel alot better about my $1500 investment now...
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
THANKS FOR YOUR SERVICE!!
_________________
JEHM 150, Joyner 250, Roketa 800
I'm not sure if it's a hobby or a job!!!
|
|
|
|
|
|
|
|
|
Where you from?
_________________
JEHM 150, Joyner 250, Roketa 800
I'm not sure if it's a hobby or a job!!!
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Asking a military guy where he is from is a open ended question..lol.. Let see Grew up in Danville IL, Lived in Columbia SC, Hinesville GA, and Cookville TN, But for now I call Ft Leonard Wood, Missouri home....Cant wait to get back there
|
|
|
|
|
|
|
|
|
Welcome to Buggynews and thanks for doing your part in trying to keep us safe back here in the states.
_________________
Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
|
|
|
|
|
|
|
|
|
hello and welcome there are lots of good people here that makes the buggying a whole bunch better,now get that buggy back in the dirt 
i to appreciate what you do
pud
_________________
2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Take care of yourself and thank you from all of us here. Welcome to buggynews, hopefully you can make it to one of our rallies someday.. This year it is in MO.
Stu
_________________
"The Future In Off-Road"
"PLAY TOUGH-GET DIRTY"
WWW.BLADEPOWERSPORTS.COM
WWW.BLADEPERFORMANCE.COM
1-888-44-BLADE
|
|
|
|
|
|
|
|
|
Ok found out that My terminator 150 is a Roketa and i just bought all these parts are they going to fit, Race variator with 8 gram rollers, stock clutch with #1500 pound spring installed, Coil, CDI with no rev and advance, (1) iriduim plug and (2) stock plugs (for tuning), and 122 and 128 jets
|
|
|
|
|
|
|
|
|
Dirtdigger; I remember U saying it had the GY6, yes. all these parts should fit, as that is the engine they came from. (GY6 is pretty much universial). Jets, depending on your carb would be the only parts you purchased that Id question. (same eng in my Carter GSR150) Hope U doing well !!
Jeff
_________________
Team Farm...
07Joyner 650 S.S.-Weber carb;Custom headers;ign mod;
07Carter GTR250-uni;irrid.plug;exh mod;tuff custom ch.guard;
06CarterGSR150R2-Dr.Pulley clutch,;uni;140 main;irrid.pl,;Teflon variator w/9gr;1500lb.spring;mod exh;
08HammerHead GT150
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| dirtdigger wrote: |
| Ok found out that My terminator 150 is a Roketa and i just bought all these parts are they going to fit, Race variator with 8 gram rollers, stock clutch with #1500 pound spring installed, Coil, CDI with no rev and advance, (1) iriduim plug and (2) stock plugs (for tuning), and 122 and 128 jets |
those parts should fit just fine dirtdigger. i have the same motor as you and there are some differences you should have the 2 bolt valve cover engine.the head, cylinder and a few other things are different. the 155cc kits won't fit our motors.
with a few mods like you are doing and they run pretty strong.
looking that you got 8 gram roller you must be looking for grunt another good mod is the 39t sprocket helps on take off and climbing hills,just an all around good mod.
pud
_________________
2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
|
|
|
|
|
|
Articles
