BuggyNews Buggy Forum Index

Go Kart & Buggy ArticlesArticles Start FlashChatBuggyNews Chat! (0) GamesGames   Log in to check your private messages


Click banner to be taken to www.McDonoughpowersports.com



*** You MUST be logged in to view pictures posted in messages, and to activate other special forum features!! ***






Author Message
<  Aftermarket and OEM Parts - Mini Buggy  ~  Joyner 250 Sprocket and Chain
eggyhed
Post Fri Apr 11, 2008 8:39 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 17 Jan 2006
Posts: 966
Pictures: 8
Gallery pictures: 8
eggyhed's gallery
Location: joliet,il.

The new larger sprocket on the 2008 250 Joyners
don't fit on an 2007 model. It's to big in diameter, the
chain rubs on the frame, and the new longer chain is
two links to short at the shortest adjustment. Just
letting guys know this before you go through the
hassle of taking the rear assembly all apart.

_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot



Back to top
View user's profile Send private message Send e-mail
Sponsor
supersoxy
Post Fri Apr 11, 2008 9:37 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 12 Sep 2005
Posts: 669
Pictures: 0

Location: Quad Cities, IL

I hope you didn't waste too much time doing that. That sucks.

Did you get the rest of your stuff in - buggy back together?

_________________
Ron

2007 Twister Hammerhead 250SS, UNI, aftermarket exhaust, 17 gram sliders, blue Polini torque spring, 32mm MRP pumper carb with 135 main jet, iridium plug (indexed), ITP mudlites 23x10x10 on the rear.
2003 Suzuki Eiger 4x4
2005 Talon 150 (sold)



Back to top
View user's profile Send private message
eggyhed
Post Fri Apr 11, 2008 9:41 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 17 Jan 2006
Posts: 966
Pictures: 8
Gallery pictures: 8
eggyhed's gallery
Location: joliet,il.

Yes I did, runs good, lets ride......... Very Happy
_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot



Back to top
View user's profile Send private message Send e-mail
Sponsor
Buggster
Post Sat Apr 12, 2008 3:43 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Newbie


Joined: 25 Apr 2007
Posts: 8
Pictures: 0


I was able to put the 43 sprocket on my 2007 Joyner 250cc just fine. Slide the new sprocket on the shaft, but don't bolt the sprocket to the shaft until you get the shaft back into place with the four bolts that hold it to the frame. After everything is back in place, then put the six bolts into the sprocket bolting to the shaft. You need the extra play to get it in there. I had to add one #530 half link to the chain. I get them for $3.50 ea. Works like a charm. The chain is way to tight to run on the Joyner without the half link. After the chain stretches some, then the half can be taken back out.


Back to top
View user's profile Send private message
Jabo
Post Sat Apr 12, 2008 7:27 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Site Admin


Joined: 23 May 2005
Posts: 6311
Pictures: 10
Gallery pictures: 10
Jabo's gallery
Location: Holyoke Massachusetts

Do you guys have a picture of this sprocket? I am looking for a 520 sprocket with about 40ish teeth.
_________________
Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin



Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
eggyhed
Post Sat Apr 12, 2008 8:32 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 17 Jan 2006
Posts: 966
Pictures: 8
Gallery pictures: 8
eggyhed's gallery
Location: joliet,il.

I was able to mount the sprocket on the shaft, that
I could do in the dark with both eyes closed Rolling Eyes
When I slid the sprocket axle all the way forward and
tryed to hook up the chain, for one, the front of the chain was rubbing the cross brace, so I had to slide
the sprocket back an inch to clear the crossbrace,
when doing that, I ended up being two links short in
the chain, so I added two links. Then when sliding
sprocket axle back to tighten chain, the pillow blocks
hit the back of the cross frame, not allowing the
chain to tenson up correctly, besides that, the two
adjustment bolts were going to be a 1 1/2" to short to
hold the pillow blocks in place. Maybe my carrier frame
is built differant than others, don't know, all I know, is that sprocket and chain don't fit my buggy!

_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot



Back to top
View user's profile Send private message Send e-mail
Sponsor
the9fan
Post Sat Apr 12, 2008 4:01 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 10 Feb 2006
Posts: 404
Pictures: 3
Gallery pictures: 3
the9fan's gallery
Location: Stokesdale, NC

Jabo wrote:
Do you guys have a picture of this sprocket? I am looking for a 520 sprocket with about 40ish teeth.


Here's a couple of links for some 520's. Just need to machine the center to YOUR hub. I did for $10 at my local machine shop. You geared too high?

http://www.gokartgalaxy.com/uni-hubs_&_vari-hubs.htm

http://www.jackssmallengines.com/gokart_alumsprkt_520f.cfm

_________________
Surprised Transformed VTwin Kinroad Boxer Surprised



Back to top
View user's profile Send private message Send e-mail AIM Address
Jabo
Post Sat Apr 12, 2008 4:43 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Site Admin


Joined: 23 May 2005
Posts: 6311
Pictures: 10
Gallery pictures: 10
Jabo's gallery
Location: Holyoke Massachusetts

the9fan wrote:
Jabo wrote:
Do you guys have a picture of this sprocket? I am looking for a 520 sprocket with about 40ish teeth.


Here's a couple of links for some 520's. Just need to machine the center to YOUR hub. I did for $10 at my local machine shop. You geared too high?

http://www.gokartgalaxy.com/uni-hubs_&_vari-hubs.htm

http://www.jackssmallengines.com/gokart_alumsprkt_520f.cfm


This would be for a custom build I am making for my son. Check it out.
http://www.buggynews.com/topic13417.html?highlight=brodys

_________________
Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin



Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
the9fan
Post Sat Apr 12, 2008 7:53 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 10 Feb 2006
Posts: 404
Pictures: 3
Gallery pictures: 3
the9fan's gallery
Location: Stokesdale, NC

Don't know how I missed that! That's cool. My 8yr old girl is driving me nuts to have something smaller than Dad's buggy. Laughing
_________________
Surprised Transformed VTwin Kinroad Boxer Surprised



Back to top
View user's profile Send private message Send e-mail AIM Address
Sponsor
Display posts from previous:   
All times are GMT - 4 Hours

Page 1 of 1
BuggyNews Buggy Forum Index  ~  Aftermarket and OEM Parts - Mini Buggy

Post new topic   Reply to topic


 

Similar Topics
Topic Author Forum Replies Posted
No new posts Clutch, Spring, Sliders? Hammerhead 250 Buggy83 Aftermarket and OEM Parts - Mini Buggy 5 Sun Oct 12, 2008 10:42 pm View latest buggy post
No new posts THROTLE CABLE FOR RAIDER 250 DOUBLE. 2FAST2C Off Road Go Kart & Mini Buggy Discussion 0 Sun Oct 12, 2008 8:41 pm View latest buggy post
No new posts ADVICE....2005 Joyner Dirt Devil 250 ... AZOFFROAD Aftermarket and OEM Parts - Mini Buggy 12 Thu Oct 09, 2008 9:15 pm View latest buggy post
No new posts Head Gasket for a 800 Joyner carberated JRSUPERSTAR Engine Clinic - Full Sized Buggies and Sand Rails 10 Thu Oct 09, 2008 12:54 am View latest buggy post
No new posts Hammerhead 250 No / Single Spark crayoncvt Maintenance and Repairs - Mini Buggy 3 Tue Oct 07, 2008 12:19 pm View latest buggy post




Powered by phpBB

Privacy Policy SITEMAP More Resources