haha yea I bet! I have been very busy, new house lots of work there just getting back to the buggy scene. Winter is coming and I am thinkin about another build. Also sorry for the hijack... I'll be back around _________________ Randy
GTR250,GK32,Joyner 650SS, custom buggy http://www.youtube.com/watch?v=YiA8jfczFV8
yep glad to see ya back on here _________________ Blade buggies,Carter buggy's, ams (manco) , joyner, parts for almost anything
MRP dealer
Tucker Rocky Dealer
Vega Helmet dealer
I.T.P. tire and wheel dealer
www.mcdonoughpowersports.com
I replaced the starter and it fired up. Waiting on a longer steering rack. The tabs I added to the shorter one just wont work. It should be here any day now. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Haven't seen this tread for a while. How does it drive besides the bump steer. I just used a steering damper and it eliminated the bump steer and allowed it to be limited.
Orange and black side panels. _________________ Work in progress
Fully independent Ninja 500Ex powered
home built buggy.
Wanna see it? Click Here
http://www.buggynews.com/topic9185-30.html
I fixed the bump steer problem and I got the new rack, I just haven't had time to put it in. I'll get there soon... _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
how did you fix your bump steer?I have to hold on the steering wheel really tight or it will be pulled out of my hands.Its done it since day 1.Its a sunl 150. My blade dx has no problem,I can drive it 1 handed thru the woods (for the most part)
thanks
karl _________________ Blade 150 DX
170 big bore kit
A12 cam
VM26 190main uni
prod clutch,bell,vari
12grm sliders,1500 spring
gates belt
eastside pipe
37 dble chain
stryker rear tires
fox rear shocks,polaris front w/spacers
Mine was as simple as moving the tie rod out further. The steering rack, where the tie rod connects, has to be even with the pivot point on the a-arms. That fixed my problem. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Finally had time to get working on the buggy. I put in the new rack and was able to test it a little. I had to play around with the clutch, variator, and rollers and ended up using the stock clutch with a 2000 spring, 16 gram sliders and I am not sure which variator I have in there right now. Sweet set up for it.
I can't get the rear brakes working for the life of me. I have a bleeder pump that I hook up to the rear caliper and it seems to be working but it isn't. Front brakes work fine and when I pull on the e-brake lever it works fine also. I had it working when I first installed them but now, nothing.
I also need a new carb for it. Can anyone do better than the ones I see on ebay. I see them for $40 but I am a little leery of them. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Articles
