i will keep my fingers crossed for you stang
also don't forget and get you a good tube of wheel bearing grease to repack your wheel bearings when you have the axle off. some good high temp grease like they used on boat trailers
for the water that could be getting around your seals.
pud _________________ 2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
ive already got some real good wheel bearing grease. i knew i was going to need some sooner or later. _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
Articles
