jabo am i going to need to repost these pictures again when you start that picture voting forum? _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
You need to check out the DP ride forum in events and gatherings. The south east buggy meet had more red clay mud than you could shake a stick at. If you did not wash the buggy off after each ride the brakes would not work and as CKAU found out the hard way packs in behind the brake pedal and you cannot even press the pedal down. I will take a picture of the Talon when I get home. Some of the mud came off on the 6 hour drive back home in the rain but it is still covered in nasty red Georgia clay mud.
RH _________________ Carter Talon GX150IIR, KOSO Clutch, 9 gr rollers, KOSO variator, 1500 RPM spring, CVT snorkel, K&N filtered crankcase+trans vents, Red neck intake w/ uni filter, modified DLX muffler, 132 jet, drilled and shimmed slide, hot coil, hp CDI unit, skid plate.
jabo am i going to need to repost these pictures again when you start that picture voting forum?
No, I will just move this thread over to the new forum. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
sweet. im looking forward to this new forum. im all over it like white on rice...or like mud on a buggy. you pick!!! _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
Well we just got a good melt down up here in PA. All 11 acres are starting to turn into swamp, just under a thin layer of ice. I hope it holds up for the weekend so I can get all the buggies out there.
I'll put my black mountain mud against the red clay any day. My mud eats buggys for lunch.
I love the pictures. I think that this is a great idea. Every month we will vote on the muddiest pictures and I will post them on the front page. I will start a new forum for "Muddy Pictures" and we can post these pictures there then every month we will vote on which one will go on the front page.
Great idea guys!!!
-Jamie
You can thank me with an adult beverage at the Buggy Bash in June if you want, Jabo... But I'll have to share with 65stang, as he is the one doing all the work... i just suggest things! lol
yes very well said there RMB.... _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
It is hard to tell but we had used a pressure washer on this 10 minutes before the picture was taken. The buggy did not want to move from all the mud packed in the rims and brakes so we had to spray off part of the mud.
The SE meet was a muddy blast.
RH _________________ Carter Talon GX150IIR, KOSO Clutch, 9 gr rollers, KOSO variator, 1500 RPM spring, CVT snorkel, K&N filtered crankcase+trans vents, Red neck intake w/ uni filter, modified DLX muffler, 132 jet, drilled and shimmed slide, hot coil, hp CDI unit, skid plate.
Well we just got a good melt down up here in PA. All 11 acres are starting to turn into swamp, just under a thin layer of ice. I hope it holds up for the weekend so I can get all the buggies out there.
I'll put my black mountain mud against the red clay any day. My mud eats buggys for lunch.
Let the games begin!
yeah im with you on that one. im not big on the red clay mess either. i would rather have soft wet mud. _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
Articles
