my wife took out the buggy and did some riding and when she came back it was squweeking really bad sounds like from the back bearings do those thing break and how hard are they to replace i have a carter brother 2911
if it got some junk in it (like from riding through a mud hole) then i could definitley see one going, they're only about $10 probably, available a lot of places on the net.
Ben _________________ Yerf Dog 3203 w/ hydraulically dampened F/R shocks, mechanical disk brake, charging system, lights, battery, Kill switch w/ key, 8 tooth drive sprocket, Tecumseh 6.5 w/ milled head, Hi-Torque cam, batman hop up kit, 100% carb mod, equus tach added
Not familiar with that model of Carter Brothers. I had to replace mine a few months ago. I just pulled the old ones and had them measured for a new set. You can check and see if it has # on the old one and cross reference that #. I paid $12 a piece for full sealed bearings.
RH _________________ Carter Talon GX150IIR, KOSO Clutch, 9 gr rollers, KOSO variator, 1500 RPM spring, CVT snorkel, K&N filtered crankcase+trans vents, Red neck intake w/ uni filter, modified DLX muffler, 132 jet, drilled and shimmed slide, hot coil, hp CDI unit, skid plate.
thanks guys i went to a few places like TSC tractor supplys and northerntools and both had nothing i guess i will have to keep looking _________________ keep your friends close and your ugly friends even closer
i know you can order them online, try mfgsupply.com or bmikarts.com
Ben _________________ Yerf Dog 3203 w/ hydraulically dampened F/R shocks, mechanical disk brake, charging system, lights, battery, Kill switch w/ key, 8 tooth drive sprocket, Tecumseh 6.5 w/ milled head, Hi-Torque cam, batman hop up kit, 100% carb mod, equus tach added
nec237 have you tried here (www.GoPowerSports.com)
i don't know anything about your buggy but it does look cool.
they show they have parts for the 2911 gocart bearings and things.
pud _________________ 2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
OK just ordered them from BIGE they might come in tesday and i will be back on the trails by wensday. thanks again BIGE nice meeting you. _________________ keep your friends close and your ugly friends even closer
Articles
