Hey all, been without power for two days but its back on now. I acant wait to get my spring and 10grm rollers hope i get them before this weekend so i can put them in. dose anyone have any secerets or tips to make it go smoothly ? _________________ ROLLTIDEANDHAPPYTRAILS 2005 twister 127.5 jet 10grm. rollers moded pipe uni filter speedometer
This is an outstanding upgrade guide. I have a sunl 150 and believe I can and will do this using your guide. Thank you very much for the time and effort. _________________ Eastside HP exhaust and intake. UNI filter
Racing CDI, HO coil from Blade
NGK Iridium plug
Racing clutch and spring 8 gram rollers from Bergman
dial a jet
I personally like the buggy lift.
Nice report, wish I did the roller replacement/clutch when I replaced my belt, added to my to-do list. _________________ 05 Explorer II GT package, no reverse, EastsideMS intake/UNI, Mikuni TM24 carb on Blade intake, Carter pipe, hour/tach meter, replaced fuse, gates cvt belt, custom engine mount, Koso variator/10g slides, 1500# spring, o-ring chain, cdi, coil, IR plug, LED
Ok got my spring and rollers. can someone tell me what the BB's are that came with the spring? I am assuming they are like little roller bearings that fit on the soring somehow.? and by the way thanks CARL!!!!!!!!! Cant waite to get this in this weekend!!!!!!!!!!!!!!!!!!! _________________ ROLLTIDEANDHAPPYTRAILS 2005 twister 127.5 jet 10grm. rollers moded pipe uni filter speedometer
Yo Cary, Glad you got the goods ok. The ball bearings go in the groove the original spring sat in, (the opposite of the end you put the big nut against to assemble it). The gold colored ring then goes on top of them, forming the top of the bearing race, the spring sits on top of that, then it goes as you took it apart. Use a SMALL amount of wheel bearing grease on the balls to hold them in place and lube them. You may have a few extra balls, save them for when you loose some later . Carl _________________ PEIRSPEED 252, DUNE 150. HAD SAHARA 150 & 2004 KASEA. PLEASE DON'T TELL MY WIFE!!
Thanks bergymon and thanks again for the parts!!!!!!!! Will get them in this weekend i will let everyone know how it goes. (hopefully well)!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! _________________ ROLLTIDEANDHAPPYTRAILS 2005 twister 127.5 jet 10grm. rollers moded pipe uni filter speedometer
OH BOY got my spring and rollers in no problem. works great big improvement over the stock! got one question though my spring came with littlr ball bearings and round plate with a groove in it the original plate the spring was in is made on to the pulley the new plate wuoldnt fit in it and i sure wasnt going to beat it of so i put the new spring in the plate like it was without the ball bearings. The new spring is much stronger than the stock one! I definitly have better take off and lots better staying power i tell ya man i love it well worth the money!!!!!!! OK WHOS GOT A JET AND A UNI.?! im READY TO GO. ok i got to go nearly time for the ballgame!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ROLLLLLLLLLLLLLTIDEROLLL!!!!! _________________ ROLLTIDEANDHAPPYTRAILS 2005 twister 127.5 jet 10grm. rollers moded pipe uni filter speedometer
Glad it worked out for you. _________________ 2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni
I got 10grm. rollers any less would be to much for me this however is just right _________________ ROLLTIDEANDHAPPYTRAILS 2005 twister 127.5 jet 10grm. rollers moded pipe uni filter speedometer
Articles
