Here's some snow and street video. I tested out the Hit Clutch in the snow in some short trails by my house. The wheels never stopped spinning. Gotta love the snow!
Great driving video Billy , This is definetly on my BuggyNewsVideo Favorites! What was the temperature where you were at that day?
Van _________________ DRIVE IT LIKE YOU STOLE IT!!!!!!!!!
DAZON 150 SINGLE SEAT
2.5inch rear wheel spacers
1.5inch front wheel spacers
UNI, 130jet, BIGE built intake tube, custom built exhaust, HO coil, adjustable CDI, iridium plug
Thanks Van, I'm glad you liked it. I did the video today. It was in the mid 30's. The snow has been on the ground for over a week and it has been in the 20's at night and 30's during the day all week. Prior to today the ground was mainly covered with ice. I did do a video yesterday also but the camera was at the wrong setting and the videos were to big for this site. So of course I had to do it again How's the weather in NC. I have family in Charlotte. _________________ Dune 150 : 39t sprocket, uni filter, cut out exhaust tip,drilled inside,145 rejet, stock tires front(changing soon) 22x10-10 carlisle on rear. 1500 rpm spring, 9.0 gram rollers. HP cam,coil, iridium plug, HIT Clutch, blaster rear shocks
Today it was mid 50's, mainly sunny this afternoon. Right now it is 50degrees on my front porch, no stars visable. Here recently we have had highs in the low 80's with clear skies. I was really liking that global warming effect we had going for a while
Charlotte is a great place to be in North Carolina! I have an X-wife from New York
Van _________________ DRIVE IT LIKE YOU STOLE IT!!!!!!!!!
DAZON 150 SINGLE SEAT
2.5inch rear wheel spacers
1.5inch front wheel spacers
UNI, 130jet, BIGE built intake tube, custom built exhaust, HO coil, adjustable CDI, iridium plug
Billy!!!!! nice dune 150 you got there!!! lol... How does that clutch feel? did you feel the difference? It sounds like you are just getting up to a good speed and you run out of pavement when you are cruisin on those streets!!! nice neighbors that wave too!!!
lol
How did you mount the cam? Right on the steering column??? lol... Great vids!!!
See that. NY connects everywhere!
Thanks John, your dune 150 is nice too. The clutch feels good. I haven't tried the different pillow springs yet. It definitley responds very well. Yea, I ran out of pavement, but I was scooting along nicely. There is a much longer straightaway in my development but at the time school was letting out so I have to be careful. I have to figure out my wife's gps so I can get the top speed on the dune. The neighbors have always been great with us. I don't go on for hours which probably helps. Some of them ride around on their machines and motorcycles also and nobody complains. We just need more room. I mounted the digital cam right on top of the key box with the always reliable DUCT TAPE. Held steady like a champ LOL... Billy. _________________ Dune 150 : 39t sprocket, uni filter, cut out exhaust tip,drilled inside,145 rejet, stock tires front(changing soon) 22x10-10 carlisle on rear. 1500 rpm spring, 9.0 gram rollers. HP cam,coil, iridium plug, HIT Clutch, blaster rear shocks
The world is getting smaller by the day Billy! Your buggy really rips in the snow. No snow here yet, today here it was cloudy with temps in the low 50's. _________________ DRIVE IT LIKE YOU STOLE IT!!!!!!!!!
DAZON 150 SINGLE SEAT
2.5inch rear wheel spacers
1.5inch front wheel spacers
UNI, 130jet, BIGE built intake tube, custom built exhaust, HO coil, adjustable CDI, iridium plug
Great videos Billy, Did that sign say NO MOTORIZED VEHICLES ALLOWED?????? But I guess if you can run a stop sign....well I won't tell anybody Duct tape,you gotta love it.
Really though nice ride,and good shooting!
Mike _________________ I'LL REST WHEN I'M DEAD!! TILL THEN I'LL PLAY WITH MY HAMMERHEAD 150 WITH 9GRAM ROLLERS,1500LB SPRING, BLISTER AND SANDMAN'S REVERSE BRACKETS, MRP RACING CLUTCH,AND ITP MUDLITES!
KANSAS GANG LET'S RIDE!
What signs? The NO MOTORIZED VEHICLE sign is only for times when there isn't snow. _________________ Dune 150 : 39t sprocket, uni filter, cut out exhaust tip,drilled inside,145 rejet, stock tires front(changing soon) 22x10-10 carlisle on rear. 1500 rpm spring, 9.0 gram rollers. HP cam,coil, iridium plug, HIT Clutch, blaster rear shocks
How long did it take you to put the clutch and stuff on?
Have you finished your writeup yet?
It's raining now, so the snow may be gone before I get a chance to get to the buggy. _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com