| Author |
Message |
| < Buggynews Classified ~ Twister Performance Exhaust For Sale |
|
|
|
|
Kell, do you still have the exhaust, check your PMs. I might buy the one you have if you still have it.
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
bump,
$65 including shipping
_________________
Buggy-less at the moment.
Dazon Raider Mini 90 (busted transmission  )
|
|
|
|
|
|
|
|
|
lowered to $60 including shipping, that's a steal!
| Kell wrote: |
I just ordered this in from Reliable Go-karts (fast shipping by the way!) but have decided not to use it. I am asking $70 including shipping, (cost me $99 to get it to me) Includes the mounting strap/bracket.
However, I have made the following (necessary) changes, I removed the restrictor tube welded in from the factory at the headpipe (this is a major pain to do since it was welded in there).
I cut off the restrictive plate at the end of the pipe as it enters the muffler.
I have drilled a couple of extra holes in the baffle, but these can be removed if maximum effect of the performance pipe is desired.
I never mounted it, it did come with a small (but deep) scratch on the engine side of the aluminum muffler but shouldn't be seen when mounted. I have scratched up the flange where it mounts to the engine when cutting the restritor tube out (clamped in a vise), but again will never be seen. Should fit just about ANY 150cc buggy out there EXCEPT Dazon, I think Dune type buggies take a little modification? I can post a pic if interested but it looks just like every other Twister Performance pipe out there with aluminum muffler.
thanks! |
_________________
Buggy-less at the moment.
Dazon Raider Mini 90 (busted transmission )
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| Kell wrote: |
lowered to $60 including shipping, that's a steal!
| Kell wrote: |
I just ordered this in from Reliable Go-karts (fast shipping by the way!) but have decided not to use it. I am asking $70 including shipping, (cost me $99 to get it to me) Includes the mounting strap/bracket.
However, I have made the following (necessary) changes, I removed the restrictor tube welded in from the factory at the headpipe (this is a major pain to do since it was welded in there).
I cut off the restrictive plate at the end of the pipe as it enters the muffler.
I have drilled a couple of extra holes in the baffle, but these can be removed if maximum effect of the performance pipe is desired.
I never mounted it, it did come with a small (but deep) scratch on the engine side of the aluminum muffler but shouldn't be seen when mounted. I have scratched up the flange where it mounts to the engine when cutting the restritor tube out (clamped in a vise), but again will never be seen. Should fit just about ANY 150cc buggy out there EXCEPT Dazon, I think Dune type buggies take a little modification? I can post a pic if interested but it looks just like every other Twister Performance pipe out there with aluminum muffler.
thanks! |
|
Do you still have this? Do you take PAYPAL ?
|
|
|
|
|
|
|
|
|
Hi,
Do you still have the pipe for sale by chance ?
Thanks, Chris
|
|
|
|
|
|
Articles
