Post subject: Joyner 250cc Slider and Clutch Spring install
Posted: Wed Sep 12, 2007 2:13 am
Probie
Joined: Mon Aug 27, 2007 6:10 pm Posts: 7 Location: Susanville, CA
I installed the 17g sliders and blue spring from Glade. This is a great mod with great results, i recommend it to everyone with a buggy.
I liked dealing with Glade, i got a great price and he is very helpfull althought the guide he sends with the kit really isnt that great.
I read the sticky about Dewmanity's install on his 150cc and downloaded his step by step PDF. This was a life saver. if you have not downloaded it DO IT NOW! Although my Joyner (CF Moto) [CN250] 250cc Sand Viper is a little differnet so I took some picture of the install and wrote a supplement to Dewmanity's guide for Joyner 250cc owners. Let me know if this helps anyone out.
And Glade if you want to use this when you send out these rollers for Joyner owners I am cool with it.
Joined: Mon Aug 27, 2007 6:10 pm Posts: 7 Location: Susanville, CA
Just did the mod last night and did some really quick test runs to check acceleration from stop but didnt get to top speed. I am going to give it a full test this weekend and see if I lost any top speed.
Joined: Mon Aug 27, 2007 6:10 pm Posts: 7 Location: Susanville, CA
Ok supersoxy I went out and tested the buggy and I think I actually picked up some top speed. with two people (me and a friend) we hit 50 on the speedometer (which is actually like 46 on the gps) and before we could only do 42 on the gps and with tow people the accel is better but alone it takes off like a bat out of devilville. Let me know how your mod goes.
Thanks for the reply. I just got mine in yesterday. I hope to find some time over the weekend to get them installed. With the tire upgrade I did, it seems like acceleration slowed a bit so I'm anxious to get that back.
Post subject: Re: Joyner 250cc Slider and Clutch Spring install
Posted: Tue Oct 02, 2007 2:14 am
Initiated
Joined: Tue Feb 21, 2006 12:47 am Posts: 54 Location: taiwan
alfordap wrote:
I installed the 17g sliders and blue spring from Glade. This is a great mod with great results, i recommend it to everyone with a buggy.
I liked dealing with Glade, i got a great price and he is very helpfull althought the guide he sends with the kit really isnt that great.
I read the sticky about Dewmanity's install on his 150cc and downloaded his step by step PDF. This was a life saver. if you have not downloaded it DO IT NOW! Although my Joyner (CF Moto) [CN250] 250cc Sand Viper is a little differnet so I took some picture of the install and wrote a supplement to Dewmanity's guide for Joyner 250cc owners. Let me know if this helps anyone out.
And Glade if you want to use this when you send out these rollers for Joyner owners I am cool with it.
Could tell us 1.]your slider [ Sliding Roller Weight ] is 23x18 or 24x18? 2.]your Joyner [ CFMOTO] CN250 is old model [ with bell 135mm] or new model [ with bell 153mm] ?
Joined: Sun Oct 12, 2008 11:25 pm Posts: 68 Location: Phoenix, AZ...Pinetop, AZ
WOW...thx alot for your thoughtfullness in doing this thread. Seriously. I am a novice at best in mechanics but I own every tool there is. I followed your instructions and even I could do it. My wife and dogs hid for the 1.5 hours it took me to do it but I was able to do it without an emergency room visit.
Users browsing this forum: No registered users and 0 guests
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum