So I guess that is the point of shimming, it just makes the spring
stiffer? I will try anything once if it works. I ride my buggy like a
trials bike.......sloooooooow and to the steepest hill I can find. I've had
4 wheeler guys just shake their heads while I climb what they think I
can't make it up. I don't care if it goes 30 miles an hour or not, I just want that tractor like torque, kinda like a Jeep. _________________ Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
So Steve, what did it change for you? _________________ Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
What exactly is the circular think in the very first pic i think its the shimmy if thats what its called. And what is the exhaust tubing you got it from and what are you measuring to get the size? Thanks for all the help.
Jordan _________________ 1 3206 yerf dog
1 talon 150 dlx 2 seater(performance pipe,jet kit,uni air filter)
Am I correct in assuming that this mod is for the stock spring and not for the performance spring that folks are selling now?
With the extra resistance on the secondary pulley, will it increase the amount of time from 0 to top speed (ie: time from low to high gear)? If yes, then would I need lighter rollers in the primary to counter this.
Are there any left handed threads in the cvt that I should be aware of before I go wrenching in the wrong direction?
Sorry if these are dumb questions; I'm just tring to make sure I have a firm grip on the concept before I rip into my cvt.
It will reduce the time from 0- top speed, as it will keep the engine at a higher rpm where it creats more hp. My testing shows lower weight rollers (8-10) compliment the spring well. With the new spring, no shims are suggested. PM or e mail me if I can help, springs, clutch and rollers are in stock. Carl@bergmansauto.com _________________ PEIRSPEED 252, DUNE 150. HAD SAHARA 150 & 2004 KASEA. PLEASE DON'T TELL MY WIFE!!
Articles
