| Author |
Message |
| < Modifications - Mini Off Road Kart ~ Reverse gear box and chain guard |
|
|
|
|
Hey guys, I pumped my gearbox full of grease and of course it started flinging it everywhere. Everything is tight, it just ozzes out. So I cut about 2" off the top of a tin 1 lb. coffee can, cut it, then made a couple of notches in one side to mount to 2 of the 3 bolts on the gearbox, I have the longer end going down above the chain towards the engine. The side of the band covers the gearbox where the O-ring is, and just about covers the chain. I think this will prevent it from throwing grease and it is a cheap simple mod. I guess you could make a real professional chain guard from heavier metal but this appears to work. I can put up some pics if needed.
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
I would like to see some pics, sounds like a great idea!!!!! 
_________________
Throw'n Dirt In SW Missouri!!
I'll Have A "MUDLITE" Please
2004 Vision Razor Z2150
Eastside Pipe
Eastside Intake
Royal Purple Synthetic Oil
UNI Air Filter
ITP Mudlite 24's on the Rear
Carlisle 21X7-10 on the Front
|
|
|
|
|
|
|
|
|
sorry it's taking so long, I will try to get some pics up this weekend.
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
here are the pics
Mvc-001f.jpg: 303 Time(s) Viewed, 78.43 KB
chain guard installed on buggy |
|
Mvc-003f.jpg: 303 Time(s) Viewed, 136.65 KB
coffee can with band cut off, and band itself |
|
Mvc-006f.jpg: 303 Time(s) Viewed, 104.09 KB
band with 2 notchs cut out for rear and top bolt |
|
|
|
|
|
|
|
|
|
|
couple more pics
Mvc-002f.jpg: 301 Time(s) Viewed, 67.81 KB
guard installed |
|
Mvc-005f.jpg: 302 Time(s) Viewed, 82.65 KB
notch cut out for rear most bolt on gearbox |
|
|
|
|
|
|
|
Articles
