Shimming

Posts: 39

hey,

thanks for the great explaination on how to shim.

Just one thing... i never use inches only mm/cm/m (metric).

so 2 1/4" o.d = 57.1500 millimeters

and

1/4" = 6.35 millimeters

Correct me if i'm wrong.

thanks again.

Posts: 65

Just put up some pics of my plastic shim for anyone interested.

http://tinyurl.com/jqf29

Posts: 66

Pictures: 0 · Guest Pictures: 0

I have the new 250 joyner. Does anybody sell a high torque spring for these or should I shim it instead? Will the 2 and 1/4 exhaust work on my cart for the shim, and should I also go with the 5/16 long shim? please help.

Posts: 6278

No spring for the 250 yet. I shimmed mine with a 1/4" and made a big difference.

Pictures: 0 · Guest Pictures: 0

has anyone triewd both a 1/4 inch and a 5/16 shim? Is 2 and a 1/4 the diameter? I have the day off tomorrow so I am heading to the hardware store. Are the 15 gram sliders or the 17 gram sliders work better for the trails?

Posts: 6278

Posts: 87

On my dune 150,are the clutch nuts metric and what size are they?i bought a electric impact and sockets,naturally they sent sae when i asked for metric!

Posts: 1869

Posts: 87

The small nut spun off preety easy,but the big nut is being a pain,had to take a dinner break and regroup,im almost afraid of the joy of compressing the spring and getting it back together.