| Author |
Message |
| < Buggies 101 - Mini Buggy ~ After you buy, the mods for increased vehicle performance. |
|
|
|
|
| pmccook1 wrote: |
I'd like to get some new shocks for my Dazon 250..... where do I start looking for new shocks ?
Phillip |
I wish I could offer advice but both the buggys I own are long-A-arm front suspension. Most of the others are short arms & a strut. I really don't know if what works for me would work on yours. Have you searched the forum to see if anyone has upgraded the shocks on their 250?
I think this topic could be a great place to get ideas, but the actual discussion probably already exists elsewhere & should be searched out.
.
_________________
_________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
http://www.rc-trucks.org/gy6-engine-performance.htm
I havent seen this, i did a search for it.
It covers all the basics i think that are desired by this section of the forum.With cool color pictures.  And does a good basic overview.
_________________
<img>
<font></font>
|
|
|
|
|
|
|
|
|
This is pretty sweet stuff although I wish there were links but it's all good.
_________________
Carter GSX150R2-10 Gram Rollers, 1500RPM Spring, Koso Clutch, Bike Speedometer, Rooftop Lights, 12V Power Plug, and Better battery
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Just do a search using the search function and the terms you are reading up above, and you shall find tons of threads on the subjects. It's a an evolving process... I just wanted to give folks who are new to all of this the terms that should be searched out.
-Steve
_________________
2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni
|
|
|
|
|
|
|
|
|
Is the GY6 motor basically the same with a 150 or 250. Since they are both Honda knock-off's. I'm thinking about getting the Sahara 250, extended frame, but noticed it needed more bottom end torque, as well as new shocks. The stock shocks are way too stiff.
|
|
|
|
|
|
|
|
|
--Got a link for this? I've modded the exhaust system a wee bit on my '04 KPX X-terro but there's definitely a choke point with that tiny diameter pipe coming off the block.
_________________
Decks awash in a sea of words...
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Thanks for the great ideas; I started by scrapping the silly intake filter and adding a Uni. Next up: exhaust manifold mods. Got a link to anyone who sells something with a larger bore, ready to go? I'll weld something onto it, as I'm using a nonstandard muffler already.
_________________
Decks awash in a sea of words...
|
|
|
|
|
|
|
|
|
When putting new roller weights on, someone said between 9-11 grams! What is the difference if its 9 grams or 12 grams?
|
|
|
|
|
|
|
|
|
the lighter the weight the more rpm's needed to push out the rollers with centrifugal force resulting in the motor running in a higher rpm and lower gear band. but dont go to lite or you will never get out of the low gear band.
_________________
2003 Honda VTX-1800C
2005 Twister Hammerhead 150cc
3000# winch
UNI redneck intake, gutted exhaust, 130 main jet, 45 pilot jet
9g rollers, 1500rpm spring, manual choke conversion
In the running for top "crash and roll" title current count (2)
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I have purchased a talon gx1502r, used, in great condition.( ) There is a small hose melted in half from contact with the muff. The idle slowly rises up higher and higher after recent use. The buggy runs great any way .Could the melted hose be the idle problem? I need a picture of the stock gy6 carb. from the left side. Thanks for any suggestions or help (in advance)!
|
|
|
|
|
|
Articles
