BuggyNews Buggy Forum Index

Go Kart & Buggy ArticlesArticles Start FlashChatBuggyNews Chat! (0) GamesGames   Log in to check your private messages

Click the Banner to be Brought to Blade Powersports
Click the Above Banner to be Brought to Blade Powersports!



*** You MUST be logged in to view pictures posted in messages, and to activate other special forum features!! ***






Author Message
<  General B.S.  ~  Solved Database Server issue.
plethora68
Post Mon Mar 06, 2006 2:23 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    



Joined: 21 Feb 2006
Posts: 9
Pictures: 0


I read about that guys problems with his Trakker. What a travesty. People pointed out some serious negatives with the Chinese buggy Market and you pull the posting. That is really weak. I run a forum for another industry and let the chips fall as long as it is real. I saw the pictures of that Trakker and it looked real bad.

I want to thank this board though. It has helped me to decide and buy a Yamaha Rhino. The Chinese are capable fo producing a first-rate machine, they just aren't going to do it for these kind of dollars. I know some of the Karts have better reliability than others, but jeeze guys, read these posts. These things are really scary.

If I were going to buy a Chinese Kart, from what I have read, I would go with Blade. If I were going to buy an American one, it would be a Manco F 265. I know Manco doesn't have reverse or advertise on this site, but be real. You cannot get 20 HP out of 250 CC pushing 1,000 pounds with no torque and expect performance or a long service life. The Stinger looks pretty cool, but it is pricey.

I am buying the Yamaha Rhino and I am goign to finance some of it. I am not rich, but I do appreciate the 3.9 percent financing, reliability and resale value. Not to mention the utility, capability, and performance.

I know this goes against many on this board, I think you are great guys, but you are pioneering this buggy market (which may get better) or may not. I would look for Manco to release a buggy with 15 HP loads of torque and reverse within a year. Maybe Polaris or Honda will jump in and then the Chinese brands may have to compete. Those companies offer financing which will make things easier on buyers with limited revenue.

Anyways, good luck but be honest. If something isn't right, fix it. Don't be shill for advertisers. They have to rise to your expectations, not vice-versa.

SD



Back to top
View user's profile Send private message
Sponsor
Hopster
Post Mon Mar 06, 2006 2:26 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Buggy News Founder RIP


Joined: 26 Feb 2005
Posts: 9836
Pictures: 1
Gallery pictures: 1
Hopster's gallery
Location: Westerly, RI

I did not... you may have noticed that the site went down for almost an hour with a database issue right after you posted. Your post was probably lost for that reason (a recent backup was restored)

The database server actually went down as I was trying to reply to your post.



Current outages you are tracking:

Color code: Unverified Verified Resolved

(mysql)
buggynews [X]
54 mins 59 secs ago: Outage verified: We are actively looking into resolving it.
59 mins 45 secs ago: Outage first reported.



-Steve

_________________
2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni



Back to top
View user's profile Send private message Visit poster's website AIM Address
plethora68
Post Mon Mar 06, 2006 2:40 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    



Joined: 21 Feb 2006
Posts: 9
Pictures: 0


I was replying to about ten posts. I use PHPBB and if you set-up your chron jobs you can have this thing back-up every hour if you want. Some of that post was old. I am glad to hear you are not removing posts though and appologize for the error.

I like your site and think you are doing a good service here. I just wish the riders of these machines could gain more control over the quality control in manufacturing. It is really sad to read about a Twiser Hammerhead, modded to death going flat out at 23 MPH with a little girl at the helm.

Most of the posts on here are less than glowing about these machines. I know they are cheap, but people work hard to make $3,000.00 and expect something to do what it is engineered to do.

Again, sorry for my error. If you need the name of a REALLY good server provider (I have a dedicated server with them), contact me via email. I have had 0 failures in 22 months.

Take Care.

SD



Back to top
View user's profile Send private message
Sponsor
lafngas
Post Mon Mar 06, 2006 3:12 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Moderator


Joined: 08 Jun 2005
Posts: 1747
Pictures: 4
Gallery pictures: 4
lafngas's gallery
Location: PHX, AZ

Not sure what HH you are talking about doing 23mph ( I can't read everything on here) but there must be something wrong with that particluar one as others easily outdo that. As for your rhino purchase I am sure you will be happy. My brother just purchased one and loves it. They do have their problems too. I'm sure if you find a rhino forum you will see that. This reminds me of the guy who came on the Ford Truck Enthusiast forum and thanked everyone for convincing him to buy a dodge because of the problems he read about. That is just ignorance if you ask me. People post on the forums for help to their problems. It is a place to get answers. Go to a Dodge site and you will see the same thing. What about the millions of people who aren't having problems and posting on there? I am sure there are thousands of buggy enthusiast who are not having problems. I sure would never base my decision to purchase something or not based solely on a forum. So to adhere to the KISS principle. If all 1500 or so members on here all had a problem with their buggies. What percentage of all buggies sold is that? Hmmm Think
_________________

LAFNGAS

05 Joyner Sand Devil
03 YZ450F
06 125cc SUNL Pit Bike
06 Rhino


Last edited by lafngas on Mon Mar 06, 2006 3:45 am; edited 2 times in total



Back to top
View user's profile Send private message Visit poster's website
lafngas
Post Mon Mar 06, 2006 3:37 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Moderator


Joined: 08 Jun 2005
Posts: 1747
Pictures: 4
Gallery pictures: 4
lafngas's gallery
Location: PHX, AZ

UH OH! Better hold the Rhino purchase, looks like they got some problems. Here are some excerpts from just a few posts on there.

"I just got back from my first trip to glamis with my rhino. With my kids in the back it bottom's out very easy. Do you guy's think adjusting the shocks will help?"

"06 Rhino Backfiring"


Noisy rear cv joints


Different post than above
"i broke left rear cv joint do i have to replace the hole axle or just the joint any help please"


"Help spotting rear diff bracket brakeage"

"I took the Rhino out today and noticed that when I was decending and not on the gas, there was a loud grinding sound"

"Took my buddy for a little spin and he starts yellin' about the seat came loose . Checked it out and the base around the latch had busted out"

"i'm going on my second set of rear brakes in less than 40 hours!!! and no, i don't ride with my e brake on? what is the problem?"

"HAS ANYONE ELSE SEEN THIS BEFORE? PLEASE SEE PICS(MIDDLE DRIVE GEAR) NOT SURE IF PICS WILL GO THROUGH. IF PICS DON'T POST, HERE IS WHAT HAPPENED. COMPLETE FAILURE OF DRIVE GEARS, IT IS LIKE A RING AND PINION ON A CAR." Man I bet that is expensive!

"I have in the past breezed through the previous postings on this topic, thinking I was un affected, until TODAY!!!!. Did the initial 25 hrs service and are 28 on from that. It never showed signs of smoke, or smelt as you might expect. It all came to a clattering holt this afternoon. I checked the the oil level several times after the initial change and are quite alarmed at the disapearance as of this afternoon, not to mention associated cost. The recommended yami service points could well be interpeted as generous or as previous post sugests, there is an underlying problem." Man that's too bad! Sounds expensive too!

Hope these guys were all still in their "6 Month (Limited Factory Warranty)"


Oh yea, did I mention my brothers 2 month old Rhino had a shock break already. Kinda makes that $3400 I paid for mine not look so bad after all.

_________________

LAFNGAS

05 Joyner Sand Devil
03 YZ450F
06 125cc SUNL Pit Bike
06 Rhino



Back to top
View user's profile Send private message Visit poster's website
chicaboo
Post Mon Mar 06, 2006 7:27 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Buggified


Joined: 13 Aug 2005
Posts: 583
Pictures: 0


Arrow

Last edited by chicaboo on Wed Mar 08, 2006 5:44 pm; edited 2 times in total



Back to top
View user's profile Send private message
Sponsor
Hopster
Post Mon Mar 06, 2006 8:43 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Buggy News Founder RIP


Joined: 26 Feb 2005
Posts: 9836
Pictures: 1
Gallery pictures: 1
Hopster's gallery
Location: Westerly, RI

This was decent until about 1.5 months ago. I've asked to be transferred twice now to a new database server.

-Steve

plethora68 wrote:
I was replying to about ten posts. I use PHPBB and if you set-up your chron jobs you can have this thing back-up every hour if you want. Some of that post was old. I am glad to hear you are not removing posts though and appologize for the error.

I like your site and think you are doing a good service here. I just wish the riders of these machines could gain more control over the quality control in manufacturing. It is really sad to read about a Twiser Hammerhead, modded to death going flat out at 23 MPH with a little girl at the helm.

Most of the posts on here are less than glowing about these machines. I know they are cheap, but people work hard to make $3,000.00 and expect something to do what it is engineered to do.

Again, sorry for my error. If you need the name of a REALLY good server provider (I have a dedicated server with them), contact me via email. I have had 0 failures in 22 months.

Take Care.

SD

_________________
2004 KPX Xterro: pumper carb, oil cooling, 10 gram rollers, Toy junkies pipe, uni
2005 Blade 150 DX: 4 Valve head, 10 gram rollers, East Side pipe, uni



Back to top
View user's profile Send private message Visit poster's website AIM Address
Picchi
Post Mon Mar 06, 2006 9:08 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Moderator


Joined: 14 Nov 2005
Posts: 1288
Pictures: 19
Gallery pictures: 19
Picchi's gallery
Location: San Diego, California

What Trakker posting was pulled?
_________________
~~~~~~~~~~~~~
PiCcHi

2005 Carter Talon GX150IIR
http://www.buggynews.com/viewtopic.php?t=3811



Back to top
View user's profile Send private message Send e-mail
Jabo
Post Mon Mar 06, 2006 9:17 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Admin


Joined: 23 May 2005
Posts: 6294
Pictures: 10
Gallery pictures: 10
Jabo's gallery
Location: Holyoke Massachusetts

Plethera68 posted something and never made it to the board. Server error.
_________________
Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin



Back to top
View user's profile Send private message Send e-mail Visit poster's website Yahoo Messenger
Sponsor
Picchi
Post Mon Mar 06, 2006 10:55 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Moderator


Joined: 14 Nov 2005
Posts: 1288
Pictures: 19
Gallery pictures: 19
Picchi's gallery
Location: San Diego, California

oh ok...well please repost!
_________________
~~~~~~~~~~~~~
PiCcHi

2005 Carter Talon GX150IIR
http://www.buggynews.com/viewtopic.php?t=3811



Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
All times are GMT - 4 Hours

Page 1 of 2
Goto page 1, 2  Next
BuggyNews Buggy Forum Index  ~  General B.S.

Post new topic   Reply to topic


 

Similar Topics
Topic Author Forum Replies Posted
No new posts Another no spark issue gstew Engine Clinic - Full Sized Buggies and Sand Rails 2 Thu Nov 20, 2008 6:34 pm View latest buggy post
No new posts Carter Bros 2910th gokart Belt issue Areblder Maintenance and Repairs - Mini Buggy 3 Sun Nov 09, 2008 6:13 pm View latest buggy post
No new posts starting issue again. 65StangGuy Engine Clinic - Mini Off Road Buggy 5 Sun Jun 01, 2008 10:13 pm View latest buggy post
No new posts starting issue again. 65StangGuy Engine Clinic - Mini Off Road Buggy 0 Sun Jun 01, 2008 10:11 pm View latest buggy post
No new posts 250 Roketa cooling fan issue and VAPO... yaitsfast Off Road Go Kart & Mini Buggy Discussion 8 Mon May 26, 2008 11:02 pm View latest buggy post




Powered by phpBB

Privacy Policy SITEMAP More Resources