An oldie, but a goodie has reserfeced. _________________ Custom Buggy http://www.buggynews.com/topic13417.html
Sahara 150cc Converted to a 350
Kasea AB150
Blade 50cc
Polaris Sportsman 700 Twin
Thanks a lot heath, I just spent a day modding my Talon and your tips for the filter helped me get my shopping list together. _________________ 2005 Carter Talon DLXIIR
10g roller weights, 1500lb torque spring, MRP racing clutch, performance CDI, redneck uni-filter intake, 130 jet, gutted and drilled out exhaust, Banshee shocks up front, '04 gear reduction, canvas top, GPS mount.
my uni came in not to long ago. After riding around yesterday(without it) i was thinking about instaling a snorkal uni to keep the water out or at least lessen how much it gets wet. would this help and what type of hose should I use. I was thinking of the hose you use for dryers. _________________ yerf-dog 3209
N.E. "GANG"
20x7x8 larger fronts and backs,new shocks,fenders,uni,reverse,10g rollers,1500 spring,39T spocket,supertrapp mufler,reinforced A-arms,new ball joints, BODY KIT, mikuni carb, single seater,
Slip the hose over the whole filter? Give it a try. I don't think anyone has tried that approach. IF the buggy runs like crap with it, just give up on the idea. I've tried a couple times to run a snorkel intake and it never worked for me. A snorkel into an airbox will work, but not directly into the carb. The carb doesn't seem to like drawing it's air from a straw--even a large straw.
I hope yours turns out better. _________________ _________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
I'm postponing the snorkal idea, just want to get me kart running. Something's wrong with my carb and i'm installing reverse.
Went to home depot today and picked up the parts for my uni. The drain tube it chrome plated not stainless steel. And it rubber couplings work better because of their flexibility. Check your carb before buying parts. My carb has a 1 1/4 o.d. so the 1 1/2 parts are to big. _________________ yerf-dog 3209
N.E. "GANG"
20x7x8 larger fronts and backs,new shocks,fenders,uni,reverse,10g rollers,1500 spring,39T spocket,supertrapp mufler,reinforced A-arms,new ball joints, BODY KIT, mikuni carb, single seater,
Look at your dad's Yerf (my old ride) and you'll see this rubber connector:
It's a section of radiator hose that goes from 1 1/4 to 1 1/2". I never had any luck finding a plumbing rubber boot that fit this transition. _________________ _________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
Articles
