| Author |
Message |
| < Engine Clinic - Mini Off Road Buggy ~ buggies owners w/CN250 engines ..Important! |
|
|
|
|
| djfriz wrote: |
Make sure you clean the oil strainer on the first oil change!
Metal shavings left over from manufacturing process. |
Where did you find this filter???
Sorry for being such a newbie...
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
To the lower right of the oil fill/dipstick. There is a big plug/cap there.
Spring and filtrt inside.
|
|
|
|
|
|
|
|
|
Thanks... I almost took that out last time I changed the oil. I will next time...
again, thanks
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Hey DJ, which direction do you turn that oil drain bung? Someone posted how they stripped it because they turned it the wrong way.
Gav.
|
|
|
|
|
|
|
|
|
it's lefty loosy righty tighty!
|
|
|
|
|
|
|
|
|
hey when u drain the cvt do u need to pull the clutch set up ?
_________________
sunl 250 cc sunl 2 seater
mods are jets and k&n filter rollers ,new muffler ,new 22x7x10 tires and rims on front ,new mudlite, shim on cvt mod air box for k&n
looking for any new mods to help get more powwer
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| clmnz wrote: |
Remove the oil drain bolt and drain oil in a pan until crankcase is
empty. To get all the oil out, replace the oil check bolt and apply
light compressed air through the crankcase breather tube which
runs outside the back of the crankcase to the air filter box.
Reinstall drain bolt. The Honda service manual recommends at
every 12K miles or two years whichever comes first you change
the oil and fill the crankcase with a good 10w30 oil through the
check bolt. Reinstall check bolt. Start engine and test ride for 2-3
minutes. Stop engine and check that the oil level is correct and
that there are no leaks. Reinstall left crankase cover and body
parts in reverse order. And now the truth---You really want to use
a good 75w90 gear oil such as Mobile 1 synthetic in the final
drive. And, all giggles aside, change the oil at least every 5K
miles or two years. You're not fighting heat in the transmission
here but rather gear shearing. Buy the oil that best fits the
prevention. Randy Pozzi |
I just thought I would check that I am reading this properly, it sounds like we use a 10w30 in the CVT, but use a 75w90 in the Selector Gearbox? Or did he mean use a 75w90 in the CVT?
Confuceoused,
Gav.
|
|
|
|
|
|
|
|
|
Great information! I just purchased a kart with this motor in it tonight. Nice to see all of this helpful information in one place.
|
|
|
|
|
|
|
|
|
so whats the proper weight oil to put in the gearbox?
_________________
roketa gk-19 250 cc,15 gram sliders and clutch spring from glade,36 tooth sprocket from tractor supply,unifilter with redneck intake,drpulley hit clutch from tnegg,50 watt amp and speakers from blade powersports
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I'm running Mobil 1 synth 75w90 - no leaks and haven't had a problem at all
_________________
250 Titan - For Dad
2 - 110 Magnums for daughters
|
|
|
|
|
|
Articles
