| Author |
Message |
| < Aftermarket and OEM Parts - Mini Buggy ~ Mud lites.... |
|
|
|
|
Just ripped off my speedo cable is all that's the only casualty. Well I assume it was the cable have no speedo now. Will take a look if sensor and magnet are in tact.
_________________
Darren,
Buggy Junkies
Too much power is almost enough!
Check out our video
http://www.youtube.com/watch?v=yWRb_UbL_F0
Click on high quality its soo much better:)
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
| Steeda wrote: |
| Just ripped off my speedo cable is all that's the only casualty. Well I assume it was the cable have no speedo now. Will take a look if sensor and magnet are in tact. |
I've done both of those. I ripped the cable in two pieces just behind the seats AND had the magnet arm move slightly making the speedo not register. Both were easy fixes. I think I moved the cable up and zip-tied it a little further outa the way.
Nice pics, BTW! Not a great way to start the day.
_________________
Ron
2007 Hammerhead 250SS, UNI, a/m exhaust, 17 gram sliders, blue Polini torque spring, 32mm MRP pumper carb, 135 main jet, iridium plug, ITP mudlites 23x10x10 on the rear.
2003 Suzuki Eiger 4x4
2006 Baja 90 Shifter
2005 Talon 150 (sold)
|
|
|
|
|
|
|
|
|
| ATL Top Dog wrote: |
| I have found that the bottom of the HH250ss acts like a big suction cup in that kind of stuff. Glad you got her out in one piece. |
That is a really good way to put it - here's my experience with the mudlites and getting stuck last summer - you're 100% right - the flat bottom of the HH really acts like a giant suction cup. It took a full sized pickup truck to get me out.
_________________
Twister Hammer Head 250 - 2006
18 gr Sliders - Polini torque spring
132.5 jet - Uni Airfilter
ITP Mudlites
Yerfdog 3206 - stock - except for my welds
|
|
|
|
|
Sponsor
|
|
|
|
Articles
