| Author |
Message |
| < Engine Clinic - Mini Off Road Buggy ~ 150cc Kasea Hawk - trans won't engage forward |
|
|
|
|
Was out playing tonight and when I went from reverse back into forward, the transmission wouldn't engage. The engine's fine, it just revs freely. Feels like something just needs to be adjusted, with a little more movement from the cable back in I think it would engage. Common problem on these? Easy fix?
Thanks,
DD
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
the cable is probably to tight or kinked. another possibility is the mechanism in the reverse gear box is binding and needs to be lubricated. in any event should be an easy fix.
_________________
05 Jehm Adventure Buggy 250cc, Torque Spring, 22.5gr Rollers, Modified Roll Cage, K&N, 21x7x10 & 22x11x10 Trac Star Radials, Vapor, Body Panels, 40T Spkt
&
2003 Jehm Blazer 125cc, Vapor
10 gram rollers, 20x10x8 Razr's,
34 tooth sprocket, 9pk cooler
|
|
|
|
|
|
|
|
|
does it back up ok? does the cable move very freely, if it does it have broken
_________________
Blade buggies,Carter buggy's, ams (manco) , joyner, parts for almost anything
MRP dealer
Tucker Rocky Dealer
Vega Helmet dealer
I.T.P. tire and wheel dealer
www.mcdonoughpowersports.com
Eric Jackson
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
Backs up fine. I was a couple miles from home when it broke, and I went all the way back home in reverse. I checked the cable and it isn't kinked or broken.
|
|
|
|
|
|
|
|
|
| dmd wrote: |
| Backs up fine. I was a couple miles from home when it broke, and I went all the way back home in reverse. I checked the cable and it isn't kinked or broken. |
maybe your cable broke a strand inside housing causing it to bind up not let the gears mesh back together for forward.
that is if the cable ajustment hasn't work loose letting cable get tighter or binding up in the gearbox do to lack of grease like im4seven has said.
pud
_________________
2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
|
|
|
|
|
|
|
|
|
Pulled the cover and found this...
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
is the big nut that holds it onto the final shaft still there? I had a few that the nut came off and it did similar
_________________
Blade buggies,Carter buggy's, ams (manco) , joyner, parts for almost anything
MRP dealer
Tucker Rocky Dealer
Vega Helmet dealer
I.T.P. tire and wheel dealer
www.mcdonoughpowersports.com
Eric Jackson
|
|
|
|
|
|
|
|
|
looks to me like that chain need to be tightened up 
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
polaris ranger
|
|
|
|
|
|
|
|
|
Yes, the nut is still there - does it just need to be tightened?
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
just courious what does your name stand for dmd?
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
polaris ranger
|
|
|
|
|
|
Articles
