Hello Everbody,
This is my first post and actually my first visit. I have been on another forum, but this one seems a lot more active. I have made my buggy and am troubleshooting and putting finishing touches on it. I used a quadracer frame and a rotax engine.
welcome to buggy news, thats a nice set up. where did you get the frame or did you build it?
I have a complete 300cc sport quad I am going to build a buggy with and thats the set up I was thinking of. _________________ Blade buggies,Carter buggy's, ams (manco) , joyner, parts for almost anything
MRP dealer
Tucker Rocky Dealer
Vega Helmet dealer
I.T.P. tire and wheel dealer
www.mcdonoughpowersports.com
I used a 521cc Rotax from a 1991 Formula Plus--called a "type 36". It has 14t in the front and a 42t in the rear. Not sure on top speed, and never figured out with the math--I just used the stock gearing for the quadracer. The take-off was very slow, but cleaned the clutches and got a tighter belt. I assume the hp and torque is above 70, but under 100.
I built the frame myself and their is not much left of the wheeler. I still have a bunch to do. I need to put a kill switch inside, make a smooth hood, 5 point harness, test and tune.
how do you like the carlisle strykers i've looked at a pair of them for my buggy and wanted to know how you liked em _________________ 06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
beeze,
Welcome to the best forum for buggies there is!! No need for that other site. =)hehe
You are in the right place, ask away and answers will fly your way.
Have fun and be safe!! _________________ Baja Dune 150
9 gram rollers, Yellow main spring, Uni Filter w/pre charger, HP CDI, HP Coil and Plug wire, Gutted exhaust, 130 main jet, all new balljoints and rod ends.
Articles
