I changed the jet to a 130 and it seems to run alot better.
The battery seems to work off and on. I tested the battery with a volt meter. When the kart is running is showing to have about 13 volts.
The transmission seems to be working fine.
The parking brake is the one that is giving me problems. I noticed that the brake shoes are loose inside the calipers. I attempted to place them back but they are missing some pins to hold them in place.
On another note:
How do I check the oil on the final drive. I attempted to look for a bolt or screw but could not locate it. Any help is greatly appreciated.
Also if any one out there has any good instructions on how to change the rollers and torque spring on the cvt shaft transmissions can you share them.
Articles
