time well spent in cali. preped and painted my 65 again. here are a few pics. let me know what you think of my garage paint job. it could have been better if it wasnt 105 degrees when i was sparying.
_________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
_________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
well the plan was to go back to cali and install a brand new Painless wireing harness, all new auto meter guages, power windows, power door locks, do body work and paint......well i did 2 of the tasks.....and then bring it back to fl by car carrier. but the paint was house of color and not cheap. and the cheapest quote i got from any auto transporter was $1,200 to get it from cali to fl. not quite in my budget at this time. so shes still in cali at my mothers house. _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
road trip with a 8 month pregnant woman would not be fun. i would have to change out my gears to drive on the freeway too. i have the 3 speed cruse-o-matic with a 9 inch rear end and 373 gears.......im at 5K rpms on the freeway at 65MPH. not good for the motor for 3400 miles. ya know. _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
im not made of money. its a work in progress. i see my baby maybe once a year for the past 6 years. i was stationed in Japan for the first 4 years and then i got stationed here in fl for the past 2, and its in cali. kinda hard to get a better tranny in it from those places. but it'll get there soon enough. _________________ Blade 150DX
2K RPM clutch springs 2K lb. torque spring
prodigy variator 10G sliders, prodigy pro clutch and Bell
37T sprocket
kevlar belt
Racing CDI, high out put coil, iridium spark plug
rejet carb 115
snorkle extension for intake and CVT breather
im not made of money. its a work in progress. i see my baby maybe once a year for the past 6 years. i was stationed in Japan for the first 4 years and then i got stationed here in fl for the past 2, and its in cali. kinda hard to get a better tranny in it from those places. but it'll get there soon enough.