| Author |
Message |
| < Off Road Go Kart & Mini Buggy Discussion ~ Carter Talon/Baja Reaction 150 Shock Replacement... |
|
|
|
|
Ooohhhhhhhh!
I never even thought about it changing at the axle...duuhhhhh.
That is why I'm am VERY thankful to have people like you to assist. Thank you all very much!!!!
_________________ Baja Dune 150
9 gram rollers, Yellow main spring, Uni Filter w/pre charger, HP CDI, HP Coil and Plug wire, Gutted exhaust, 130 main jet, all new balljoints and rod ends.
|
|
|
|
 |
Sponsor
|
|
 |
|
|
|
|
| Team913 wrote: |
I'd like to see one of you guys develop a bolt on kit for this project and sell it. Upgrading the suspension on these 150's is a great mod  |
This is a great idea becuase there are SOOOOOO many 150's out there and a ton of people would benefit from this (since these stock shocks suck "big" arse), IMHO anyways.
James
_________________ Real Posts: 500
2006 Dazon 250S W/RP
HNDA 400ex 16.5" Super Front Shocks
18 1/2" rear Sno Pro Fox Shocks(W/res)
White Bros pipe
32mm pmper carb/140 Jet
K&N filter on carb
Iridium plug
Dr. Pulley clutch
15g sliders
ultra white lights
|
|
|
|
 |
|
|
|
|
Suck Big Arse would be an understatement for sure.
_________________ Baja Reaction 150 ~ Uni Filter ~ 128 Jet ~ NGK Iridium Plug
|
|
|
|
 |
Sponsor
|
|
 |
|
|
|
|
| jef_46614 wrote: |
| Suck Big Arse would be an understatement for sure. |
You are def right, But the words I was thinking would have gotten me this ---> , so I kept it child proof
James
_________________ Real Posts: 500
2006 Dazon 250S W/RP
HNDA 400ex 16.5" Super Front Shocks
18 1/2" rear Sno Pro Fox Shocks(W/res)
White Bros pipe
32mm pmper carb/140 Jet
K&N filter on carb
Iridium plug
Dr. Pulley clutch
15g sliders
ultra white lights
|
|
|
|
 |
|
|
|
|
[quote="gottie"]
| jef_46614 wrote: |
| Suck Big Arse would be an understatement for sure. |
You are def right, But the words I was thinking would have gotten me this ---> , so I kept it child proof
_________________ DRIVE IT LIKE YOU STOLE IT!!!!!!!!!
DAZON 150 SINGLE SEAT
2.5inch rear wheel spacers
1.5inch front wheel spacers
UNI, 130jet, BIGE built intake tube, custom built exhaust, royal purple oil
|
|
|
|
 |
|
|
|
|
Thank you Team 913 and from my mother, thank you as well
_________________ Real Posts: 500
2006 Dazon 250S W/RP
HNDA 400ex 16.5" Super Front Shocks
18 1/2" rear Sno Pro Fox Shocks(W/res)
White Bros pipe
32mm pmper carb/140 Jet
K&N filter on carb
Iridium plug
Dr. Pulley clutch
15g sliders
ultra white lights
|
|
|
|
 |
Sponsor
|
|
 |
|
|
|
|
| gottie wrote: |
Thank you Team 913 and from my mother, thank you as well  |
HAPPY MOTHERS DAY TO JAMES/GOTTIE'S MOM
_________________ DRIVE IT LIKE YOU STOLE IT!!!!!!!!!
DAZON 150 SINGLE SEAT
2.5inch rear wheel spacers
1.5inch front wheel spacers
UNI, 130jet, BIGE built intake tube, custom built exhaust, royal purple oil
|
|
|
|
 |
|
|
|
|
thanks Van, she does love me (sometimes has to switch to unconditional mode )
_________________ Real Posts: 500
2006 Dazon 250S W/RP
HNDA 400ex 16.5" Super Front Shocks
18 1/2" rear Sno Pro Fox Shocks(W/res)
White Bros pipe
32mm pmper carb/140 Jet
K&N filter on carb
Iridium plug
Dr. Pulley clutch
15g sliders
ultra white lights
|
|
|
|
 |
|
|
|
|
Ok, here's an update to my shock issues. I ground down the blaster shocks and they worked fine until i noticed they were over extending the suspension linkage in the back so I knocked off the bottom shock brackets and welded new ones about 3/4" back further and they work perfectly now. This is for the 07 Reaction 150 just for the record.
Next the front shocks.. I have some on the way. I found that older enduro shocks seem to be around the right size for replacing these so I've been searching on ebay for a couple of weeks and I finally found some that are exactly the right length and with some luck they might just be able to be straight bolt on replacements. I'll send a pic. they're new, old stock redwing shocks. not really sure of the brand and how good they are, but the price was right and i really need to replace those stock pieces of crap. Will update as soon as possible on these.
_________________ Baja Reaction 150 ~ Uni Filter ~ 128 Jet ~ NGK Iridium Plug
|
|
|
|
 |
Sponsor
|
|
 |
|
|
|
|
Please do. I know that you have got to love those blaster rear shocks, I know that I was very pleased with the ride, ( on my Dune 150). As far as the front I'm anxious to hear how they work for you, plus how they look, because of how the stock shocks look. When searching Ebay I didn't see anything that looked like it would fit or even resembled the stock shocks. Keep us posted.
Greg
_________________ 07 Sand Viper, Uni, 137.5 main, shimmed spring, Drilled stock rollers.
Dune 150
9g roller / 1500 tq spring
Gutted exhaust/ uni/132main jet
Arctic cat front, Blaster rear shocks
22x10x11 lightfoots rear
Hp CDI, MPR clutch
aux lites
|
|
|
|
 |
|