Snapped long final output shaft on Sunl 150

Posts: 3

Guys..I'm a total Newbie to off-road karts and purchased this kart before really doing the research. In the first few months that we owned the cart, everything was fine but a former friend of mine (on his first ride) took the kart over a 6' drop off and the final output shaft (which was the long version for a model with reverse) snapped in two. I, like most Newbies to off-road karting, found the world of kart spare parts websites difficult to navigate. I did find the part (on Buggydepot) but it has been backordered for over three months. I ordered what I thought was the same part from ScootUSA but it was the medium length version for a kart without reverse. Can I get any help? My boys are itching to get started again. Thanks!

Posts: 218

I think they may have what you need on Awesomebuggy.com, look under OEM parts and Explorer 150 and drivetrain parts. It wouldn't hurt to give them a call.

Posts: 1220

jayR you have came to the wright place i think just about any one of the dealers here can help you.
this comes to mind first bladepowersports they have them
says it works for single or double row sprockets.
sounds like you bottomed it out hard, might want to leave some more slack in your chain to work along with the suspension
myself i run around 1/2 slack in mine.
is this what you are looking.
pud

Posts: 3

Wow... You guys are the best. I'll search and find! Thanks! Very Happy

Posts: 6292

Hello.

These shafts will snap every time you go over a jump and do not let off the gas. Just let off the gas in the air and you should be all set.

Posts: 39

If the part you are looking for is the one in the picture PUD is showing ,you can get that part from BIGE at McDonough Powersports. I snapped mine about a month ago when trying to reinstall my clutch.He was able to get me the shaft in a few days. This is a relativley easy fix and the part was pretty cheap.