| Author |
Message |
| < Modifications - Mini Off Road Kart ~ Need a Good Welder in Michigan For some MOD welding ASAP |
|
|
|
|
Does any one know of a good quality welder in the michigan area? if so let me know plz!
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
What part of Michigan?
Contact Mark (guy48065) he's the resident Michigan guru.
_________________
Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
|
|
|
|
|
|
|
|
|
I know RomeoRacing--in fact he was an early inspiration for my Yerf mods. But I don't know any welders and my own abilities...well...suck 
_________________
_________________
2 Polaris RZRs & a Dune 150. Ridge Runner--Gone. Yerfdog 3206--Gone (but you never forget your 1st!).
Buggy pictures, mods, ideas, how-to's:
http://tinyurl.com/8ltm8
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I know a guy but hes in cheboygan mi,i used to live way up yonder too.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Romeo Racing, same question as D what do you need welded I got a neighbor that's pretty handy with a wire welder.
Jerry
_________________
2007 HH 250 SS, 135 Main Jet, Uni Filter, Champion 2500lb winch, Battery upgrade
2008 250 Sand Viper, 135 Main Jet, Uni Redneck. Battery upgrade
2005 Bristers 390 Boss UTV
2003 Victory Touring Cruiser
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
What i need is 2 plates welded on to the nose cone of the cart and new steel for the new ball joints at the end of the a arms. i have used a pair of spindles from a banshee with all the hardware for frnt brakes and a little extra width in the front for tire clearance.Dont think these will break under the abuse i put the dog thru. I even have the front off so i don't have to deal with the whole cart. Please let me know cuz i'm trying to get this thig ready for some crazy riding.  .I also will probally need some mounts welded for my reverse shifter set up.
|
|
|
|
|
|
|
|
|
I also need my front motor mounts moved over 2" and welded.
The new motor w/ Reverse is 2" offset from stock. 
|
|
|
|
|
|
|
|
|
I'm working nights this weekend, I'll try and contact my neighbor tomorrow after I wake up. PM a good Phone Number for you and I'll pass it on to Collin Campbell he's the welder and he can give you directions to his barn, (Easy to Find) I live on the same private drive about 20 miles from Romeo. Sounds like if you have it laid out it should be pretty easy.
Jerry
_________________
2007 HH 250 SS, 135 Main Jet, Uni Filter, Champion 2500lb winch, Battery upgrade
2008 250 Sand Viper, 135 Main Jet, Uni Redneck. Battery upgrade
2005 Bristers 390 Boss UTV
2003 Victory Touring Cruiser
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
You can reach me at 586 489 5414 anytime. Thanks for your help guys! 
|
|
|
|
|
|
Articles
