| Author |
Message |
| < Off Road Go Kart & Mini Buggy Discussion ~ Striped Dune 150 RUNS !!! |
|
|
|
|
|
|
|
 |
Sponsor
|
|
|
|
|
|
|
so did you buy the one off ebay with no wiering you got a good deal way to buy used i bout mine usd and recked to but it had frame damage
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders
polaris ranger
|
|
|
|
|
|
|
|
|
Lets see I paid 200.00 for the buggy 19.99 for the aluminum intake {ebay} and 260.00 for the exaust pipe,uni,130 jet,10grm rollers,brake pads{stu@blade} and 161.99 for a pair of new seat belts,pet rooster,gas cap,engine wire harness,ignition switch w/keys,fuse holder,and resistor {tombrelin} and 61.95 for the cdi,rectifier,starter relay and the plate that holds the rectifier,cdi ect...{baja motorsports}1.25 for the sparkplug {kragen auto parts} and most of all priceless...your guys help!!!!
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I dont see any stripes? The title of the thread says striped dune 150 
_________________
roketa gk-19 250 cc,15 gram sliders and clutch spring from glade,36 tooth sprocket from tractor supply,unifilter with redneck intake,drpulley hit clutch from tnegg,50 watt amp and speakers from blade powersports
|
|
|
|
|
|
|
|
|
racemybuick the reason I bleed the brakes is that the master cyl was completely empty there is no air in the lines I went through a big bottle of DOT 3 just to be on the safe side and still I have no brakes. fluid comes out all of the calipers when I open the bleeder's but not under pressure.
|
|
|
|
|
|
|
|
|
Your brake lines inside might of swelled up, due to
somebody not useing the correct fluid, and when just
pouring fluid in, it will make it to the calipers, but
under pressure of the brake pedal, the insides of the
lines are soft and swollen, this may not be your
problem, but I have had this happen to me before, had
to buy all new, because all the rubber brake components
were exposed to the wrong fluid.
_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
| JZTRK wrote: |
| racemybuick the reason I bleed the brakes is that the master cyl was completely empty there is no air in the lines I went through a big bottle of DOT 3 just to be on the safe side and still I have no brakes. fluid comes out all of the calipers when I open the bleeder's but not under pressure. |
Take the pads off the caliper.
Pump the brake pedal.
Does the cylinder move?
If so, how much?
Not at all?
Is it frozen?
Check out the caliper and make sure it works first.
_________________
Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
|
|
|
|
|
|
|
|
|
He can't get fluid to come out the bleeder, pumping
the brake pedal, whats that got to do with calipers
being froze?
_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot
|
|
|
|
|
|
|
|
|
| eggyhed wrote: |
| He can't get fluid to come out the bleeder, pumping the brake pedal, whats that got to do with calipers being froze? |
I misunderstood what he wrote:
| JZTRK wrote: |
| ...fluid comes out all of the calipers when I open the bleeder's but not under pressure. |
_________________
Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
|
|
|
|
|
Sponsor
|
|
|
|
|
|
|
I'm with you chris, he needs to check all the calipers,
master cyl. too
_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot
|
|
|
|
|
|
Articles
