BuggyNews Buggy Forum Index

Go Kart & Buggy ArticlesArticles Start FlashChatBuggyNews Chat! (1) GamesGames   Log in to check your private messages


Click banner to be taken to www.McDonoughpowersports.com



*** You MUST be logged in to view pictures posted in messages, and to activate other special forum features!! ***






Author Message
<  Off Road Go Kart & Mini Buggy Discussion  ~  Striped Dune 150 RUNS !!!
JZTRK
Post Sun Mar 23, 2008 1:25 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Padawan


Joined: 07 Feb 2008
Posts: 24
Pictures: 0

Location: STOCKTON CA

I installed all of the final wireing to day and plumed the fuel and cranked it up it has the performance exaust from STU @blade and a uni with a 130 jet that he sent me but I have one problem its running super lean after about a min or two the header pipe starts to glow super red I live in stockton ca and the temp here is in the 70s what size jet should I put in it ? by the way this thing sounds like a ducati


Back to top
View user's profile Send private message Send e-mail
Sponsor
racemybuick
Post Sun Mar 23, 2008 1:31 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 07 Jan 2007
Posts: 2632
Pictures: 24
Gallery pictures: 12
racemybuick's gallery
Location: hopatcong, NJ

AWESOME!!! you need at least a 135 jet if you got the performance pipe and a red-neck UNI or equiv. I would think a 130 is OK, but you are at sea level, right? Way lean could mean a few things, so check for leaks, proper timing, and never run it without the air filter!

GET US PIX and VIDS!!!!!!!


Good luck!!


John Very Happy

_________________
LEAGUE DIRECTOR, NORTH EAST BUGGY ASSOCIATION-MBRA
Owner of THE "DOOM 150"
www.northeastbuggy.com www.MBRAonline.com
http://s101.photobucket.com/albums/m55/racemybuick/?action=view&current=8f5cfe58.pbw
www.mydune150buggy.50megs.com



Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger
JZTRK
Post Sun Mar 23, 2008 11:14 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Padawan


Joined: 07 Feb 2008
Posts: 24
Pictures: 0

Location: STOCKTON CA

it was only ran and reved up a few times in the garage and the header started to glow so I shut it down I dont want to burn a valve or something but I didnt have the uni on B/C its not oiled yet would that make a differance ? or do I still need a bigger jet


Back to top
View user's profile Send private message Send e-mail
Sponsor
racemybuick
Post Sun Mar 23, 2008 11:21 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 07 Jan 2007
Posts: 2632
Pictures: 24
Gallery pictures: 12
racemybuick's gallery
Location: hopatcong, NJ

oh yeah!!!! gotta have the UNI on there!!!! Huge difference on jetting and such. PLUS, if you run, even for a few minutes without a filter, you can do a lot of damage if there is dust, dirt or anything in the air. These motors are ultra sensitive sometimes, and little dust and dirt in the vlaves wrecks the guides, or worse, the rings.... ALWAYS run the filter... if you are just test running at idle and a couple revs, you dont have to oil the UNI... but INSTALL THE UNI!!!! lol


We want pix!!!!!


john Very Happy

_________________
LEAGUE DIRECTOR, NORTH EAST BUGGY ASSOCIATION-MBRA
Owner of THE "DOOM 150"
www.northeastbuggy.com www.MBRAonline.com
http://s101.photobucket.com/albums/m55/racemybuick/?action=view&current=8f5cfe58.pbw
www.mydune150buggy.50megs.com



Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger
JZTRK
Post Mon Mar 24, 2008 3:34 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Padawan


Joined: 07 Feb 2008
Posts: 24
Pictures: 0

Location: STOCKTON CA

OK HERE ARE SOME PICS

P1010027.JPG: 5 Time(s) Viewed, 418.42 KB
AFTER I GOT IT HOME AND HOSED IT OFF

P1010027.JPG

Klik here or on the thumb to look at it in real size


P1010030.JPG: 4 Time(s) Viewed, 370.95 KB
HERE IS THE PIPE THAT I GOT FROM STU

P1010030.JPG

Klik here or on the thumb to look at it in real size


P1010034.JPG: 4 Time(s) Viewed, 377.21 KB
A SHOT FROM THE REAR

P1010034.JPG

Klik here or on the thumb to look at it in real size


P1010037.JPG: 5 Time(s) Viewed, 404.19 KB
HERE IS THE MOD I DID TO MAKE STU'S PIPE FIT A FEW TAPS WITH A HAMMER AT THE FIRST BEND TO CLEAR THE A FRAME

P1010037.JPG

Klik here or on the thumb to look at it in real size





Back to top
View user's profile Send private message Send e-mail
racemybuick
Post Mon Mar 24, 2008 5:46 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 07 Jan 2007
Posts: 2632
Pictures: 24
Gallery pictures: 12
racemybuick's gallery
Location: hopatcong, NJ

you got that nice intake manifold like I have. You will defiantely need a 135 jet!!! that pipe, intake, uni and all will give you HUGE gains!


I think a bigger jet for sure, but with the filter on, you may run a little less lean....


Nice job on the repairs!!! Keep up the great work!!!


John Very Happy


buggy mods complete 008.jpg: 6 Time(s) Viewed, 104.29 KB

buggy mods complete 008.jpg

Klik here or on the thumb to look at it in real size



_________________
LEAGUE DIRECTOR, NORTH EAST BUGGY ASSOCIATION-MBRA
Owner of THE "DOOM 150"
www.northeastbuggy.com www.MBRAonline.com
http://s101.photobucket.com/albums/m55/racemybuick/?action=view&current=8f5cfe58.pbw
www.mydune150buggy.50megs.com



Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger
Sponsor
ageekwithabuggy
Post Mon Mar 24, 2008 7:16 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 04 Oct 2007
Posts: 1669
Pictures: 0

Location: Murrieta CA.

y did you have to do the repaires did you buy it recked or did you just want to up grade
_________________
06 joyner 250 sand viper,red metallic..blue clutch spring 17 gram sliders

polaris ranger

Second Annual SOCAL BUGGY BASH AT OCOTILLO WELLS NOV. 21-24 Details Here:http://www.buggynews.com/topic14442-90.html 1 DAY TILL THE FUN BEGINS



Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger
BIGE
Post Mon Mar 24, 2008 8:30 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Sponsoring Dealer
Sponsoring Dealer


Joined: 24 Jan 2006
Posts: 4193
Pictures: 22
Gallery pictures: 18
BIGE's gallery
Location: Hampton GA

looking good. Very Happy
_________________
Blade buggies,Carter buggy's, ams (manco) , joyner, parts for almost anything
MRP dealer
Tucker Rocky Dealer
Vega Helmet dealer
I.T.P. tire and wheel dealer
www.mcdonoughpowersports.com






Eric Jackson



Back to top
View user's profile Send private message Send e-mail Visit poster's website
JZTRK
Post Mon Mar 24, 2008 10:50 pm 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
Padawan


Joined: 07 Feb 2008
Posts: 24
Pictures: 0

Location: STOCKTON CA

The buggy had all of the wireing striped off of it be for I got it. before I can take it out I need a new master cylinder. I put all new pads on it and bleed the brakes and the pedal goes to the floor Sad

P1010033.JPG: 4 Time(s) Viewed, 378.85 KB
and after

P1010033.JPG

Klik here or on the thumb to look at it in real size


P1010025.JPG: 4 Time(s) Viewed, 371.52 KB
before

P1010025.JPG

Klik here or on the thumb to look at it in real size





Back to top
View user's profile Send private message Send e-mail
Sponsor
eggyhed
Post Tue Mar 25, 2008 12:11 am 
Digg It  Del.icio.us Slashdot It!
Reply with quote    
BuggyNews Addict


Joined: 17 Jan 2006
Posts: 1009
Pictures: 8
Gallery pictures: 8
eggyhed's gallery
Location: joliet,il.

How did you manage to figure out all the wiring? Did
you get a manual? You did a pretty good job on that thing, compared to what you had originally to start with
Good job!! Very Happy

_________________
05 Blade SX-550 Suzuki
07 Sand Viper 250 ( SOLD )
89 Honda Pilot



Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
All times are GMT - 4 Hours

Page 1 of 3
Goto page 1, 2, 3  Next
BuggyNews Buggy Forum Index  ~  Off Road Go Kart & Mini Buggy Discussion

Post new topic   Reply to topic


 

Similar Topics
Topic Author Forum Replies Posted
No new posts 500ex motor in my kasea 150 buggy GMANLV Modifications - Mini Off Road Kart 15 Sat Nov 15, 2008 2:46 am View latest buggy post
No new posts Lancer/Charger 150 Turns over Will No... Funnyman Off Road Go Kart & Mini Buggy Discussion 3 Thu Nov 13, 2008 2:45 pm View latest buggy post
No new posts Any satisfied owners of Baja Reaction... racemybuick Off Road Go Kart & Mini Buggy Discussion 5 Mon Nov 10, 2008 11:42 am View latest buggy post
No new posts baja reaction 150 transmission problem GMANLV Off Road Go Kart & Mini Buggy Discussion 6 Sun Nov 09, 2008 8:30 pm View latest buggy post
No new posts taking apart reverse assembly,dune 150 ron17571 Maintenance and Repairs - Mini Buggy 1 Sat Nov 08, 2008 7:37 pm View latest buggy post




Powered by phpBB

Privacy Policy SITEMAP More Resources