thanks teamhogs
after reading what i had wrote, i left out it was a plastic oil drum nice and thick but not heavy it will stay round after you cut it.than you can cut it in half and its still sort of a nice molded for a fender they will take a good beating.
pud _________________ 2006 sunl 150b
Dr. pulley 10 gram sliders, 1500 torque spring,39 tooth sprocket,2000lb winch, red neck uni filter, 125 main jet at 1,450 elevation, drilled out exhaust,ngk iridium plug,performance intake
trying a set of 10gram rollers now
Don't forget to post some final pics. With this weather it should be a good time to test them.
I remember last year riding in the snow out at EMR. Those ITP Mudlites throw the snow way up in the air and forward. It would end up between my back and the seat. _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
That would end up being like what the Rzr comes with stock. I'm looking to make one from 3/16 or 1/4" polyethylene because it's tough & slippery. But I've heard a 4X8 sheet is way over $100. That's kinda nuts for milkjug plastic, IMO.
Take a look here - www.usplastic.com - funny thing about the pricing on this stuff. It would appear that the larger the surface area, the more costly to produce. For example, according to the product, one can buy 4 - 24" x 48" panels for less than 1 - 48" x 96" sheet. They have some stuff up to an inch thick! That should make a solid skid plate! _________________ 3206 yerf. too many mods to list. easier to list what has not been modified- seats and steering wheel. plus one set of kidinme's hand made special collectors edition fuzzy dice. We support pole dancing.
John, check out the pics from page one of this thread to see where it came from. _________________ 05 Jehm Adventure Buggy 250cc, Torque Spring, 22.5gr Rollers, Modified Roll Cage, K&N, 21x7x10 & 22x11x10 Trac Star Radials, Vapor, Body Panels, 40T Spkt
&
2003 Jehm Blazer 125cc, Vapor
10 gram rollers, 20x10x8 Razr's,
34 tooth sprocket, 9pk cooler
I thought it was the trash can at first!!! lol... Now what the heck are the kids going to ride down the hills??? garbage can lids? or did you cut those up and make a roof for your buggy? lol
Where did you get those braces from. there's one that looks like it was almost made for that purposes. The one attached to the metal strap at the 12 O'Clock position that runs to the vertical tab.
Looks like I may need to scavange some parts off of something.
Good work.. _________________ Chris Dierkens
'04 Yerf-Dog 3206 10g Rollers, 1500# Spring, Reverse, SuperTrapp, Uni
'04 KPX Xterro: pumper carb, oil cooling, 10g rollers, Junkies pipe, Uni
'05 Blade 150 DX: 4 Valve head, 10g rollers, East Side pipe, Uni
www.northeastbuggy.com
Man, that looks freakin' perfect! I need some. _________________ Carter GSX150R2-10 Gram Rollers, Stock Spring, Stock Clutch, Bike Speedometer, 12V Power Plug, UNI Filter, Twister Performance Exhaust, Bando Coil, Arctic Cat shocks in the Rear, and a Better battery
Articles
